WFJ1254 Samsung Washer - Overview
Models starting with WFJ1254
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Inlet Hose - 5 FT
PartSelect #: PS11746820
Manufacturer #: WP89503
This hose can handle hot or cold water and is five feet long.
$19.30
In Stock
Hex Head Bolt
PartSelect #: PS4205366
Manufacturer #: DC60-40137A
This part is used for the shaft on the rear of the tub and is sold individually. The head bolt is part of the spider arm assembly, and they are generally changed at the same time. If you are replacing...
$12.85
In Stock
Cold Water Valve
PartSelect #: PS11741539
Manufacturer #: WP34001151
This water inlet valve assembly is for washers.
Water inlet valve assembly controls the water flow into the washer. The assembly may include multiple parts; refer to your parts diagram for a comple...
$123.66
Special Order
Hot Water Valve
PartSelect #: PS11741538
Manufacturer #: WP34001131
This part is the replacement hot water valve for your washer. It is approximately 2-1/2 inches by 3-1/2 inches, and the valve head is approximately 1 inch in diameter. The hot water inlet valve in yo...
$106.36
In Stock
Water Valve
PartSelect #: PS4209100
Manufacturer #: DC62-30314K
One solenoid valve for hot water
$96.17
In Stock
Washer Bolt Assembly
PartSelect #: PS4217876
Manufacturer #: DC97-02412A
Assembly BOLT;SWF-P12,MOTOR/
$26.82
In Stock
Tapping Screw
PartSelect #: PS4133205
Manufacturer #: 6002-000520
This manufacturer-approved screw is for refrigerators, including Kenmore refrigerator model. Avoid cross-threading refrigerator screw during installation.
$6.40
In Stock
Drain Cap
PartSelect #: PS4207510
Manufacturer #: DC61-10673A
This drain cap is a genuine replacement part made for Samsung washers. It is a small plastic cap, approximately 1.5 inches long, that fits onto the end of the washing machine drain hose. The cap is re...
$6.40
In Stock
Common Symptoms of models starting with WFJ1254
[Viewing 3 of 3]Leaking
Fixed by
these parts
these parts
Show All
Lid or door won’t close
Fixed by
these parts
these parts
Show All
Water Filling Issues
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Cold water valve not operating
Simple 2x cross head screws remove water inlet pipe, 2 internal pipes with spring clips, 2 electrical connectors test for leaks and operation perfect
Parts Used:
-
Chris from Tyler, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers, Wrench (Adjustable)
19 of 29 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking water inlet hoses.
-
Helen from NASHUA, NH
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
4 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cold water would not shut off during wash cycle
Unplug washer (got zapped when first fiddling with it).
Turn off cold water at source and unscrew hose from washer
Remove two small screws to remove top of washer
Uncouple contacts from old cold water valve
Remove 4 small screws holding valve to washer
Remove old cold water valve
Install new valve and r ... Read more everse each procedure above.
Turn off cold water at source and unscrew hose from washer
Remove two small screws to remove top of washer
Uncouple contacts from old cold water valve
Remove 4 small screws holding valve to washer
Remove old cold water valve
Install new valve and r ... Read more everse each procedure above.
Read less
Parts Used:
-
Judy from MINNEAPOLIS, MN
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!