This replacement door catch is for your dryer door. If the catch is broken and the door will not stay shut, the dryer may not turn on. Use a putty knife to pop out the existing door catch by the locki...
$7.37
In Stock
Order within the next 5 hrs and your part ships today!
The filter collects lint during the drying cycle. This filter is 12 1/2 inches wide and 10 1/2 inches deep. Replacing the lint filter is an easy repair which requires no tools. When replacing the lint...
$61.46
In Stock
Order within the next 5 hrs and your part ships today!
This Idler Pulley includes the tri-ring and gasket and everything included here is manufacturer-certified. This part maintains correct tension on the drive belt in order to spin the drum properly. If ...
$26.95
In Stock
Order within the next 5 hrs and your part ships today!
This dryer repair kit consists of five commonly replaced dryer parts: one multi-rib belt (part #661570V and measures 93 1/2 inches long), four drum support rollers, one idler assembly, nine tri-rings,...
$53.59
In Stock
Order within the next 5 hrs and your part ships today!
This drum support roller is sold individually. Most dryers require two. The tri-rings are included. This is a drum support roller for a dryer. It is a genuine replacement part. The part includes the d...
$22.69
In Stock
Order within the next 5 hrs and your part ships today!
The internal-bias thermistor (Thermistor, Dryer Thermister, Dryer Thermistor) prevents the dryer from overheating by monitoring and controlling the temperature of the inside of the dryer drum. It is l...
$47.74
In Stock
Order within the next 5 hrs and your part ships today!
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
$13.42
In Stock
Order within the next 5 hrs and your part ships today!
Also known as Thermal Cut-Off kit. The thermostat acts as a safety mechanism that keeps the dryer from overheating and the fuse is like a backup system - it's set to trip at a higher temperature than...
$53.28
In Stock
Order within the next 5 hrs and your part ships today!
This is the moisture sensor for your dryer. It helps detect the amount of moisture in your clothes during the dryer cycle. If you notice your clothes are still wet after an automatic dryer cycle is do...
$10.72
In Stock
Order within the next 5 hrs and your part ships today!
This part attaches to the exhaust duct of your clothes dryer.
$17.97
In Stock
Order within the next 5 hrs and your part ships today!
Questions And Answers for WED8000BW0
Ask our experts a question about this model and we'll get back to you as soon as possible!
6 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Amelia
September 9, 2023
Start button broke
For model number WED8000BW0
Hi Amelia, thank you for getting in touch. The start button is not available separately, it comes with the console. You may need to replace the dryer console, part number PS11756329. We hope this information is useful!
The clothes in the dryer smell burnt and the heating element is extremely hot.
For model number WED8000BW0
Hello Ben, Thank you for the question. If the appliance is over heating, you may have a defective Internal-Bias Thermostat, High Limit Thermostat and Thermal Cut-Off, Thermostat or Moisture Sensor. These parts can be tested with a multi meter. We hope this helps!
The dryer is not drying the clothes. I have to put it on three times to dry the clothes. Do I have to replace the heating element or a thermostat?
For model number WED8000BW0
Hi Debby, thank you for reaching out. The following parts need to be checked to fix the issue: Moisture Sensor, part number PS11741408, Thermostat, part number PS11746740, and Thermal Cut-Off, part number PS334387. We hope this solves your problem! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
Hi Carl, thank you for reaching out. According to our research, we would recommend you check the following parts to fix the issue: the roller, part number PS11752609, the idler pulley, part number PS334244, roller axle, part number PS11753708, drive belt, part number PS11746374, and the drive motor, part number PS11754878. We hope this solves your problem!
The settings knob was broken off by the movers. How can I replace it?
For model number WED8000BW0
Hello Karen, thank you for getting in touch. The compatible knob for your model is part number PS11756499. You just simply need to snap in the new knob to fix the issue. We hope this solves your problem!
After a few years of slamming the dryer door (at least that is what my husband says), the catch on the dryer door broke. Using pliers (I used needle nose) squeeze the outer edges of the catch together (vertically). With it compressed, it should slide out easily. My husband had jacked with ours prior to the repair, so the broken piece i
... Read moren the door was actually sideways and would not fit through the hole. Using a screwdriver, I pushed that piece into the door (it lives in the door somewhere now). I was then able to slide out the rest of the old catch. Compress the new catch and insert it into the hole in the door. Push it in until it clicks into place. DONE! Happy Drying!
The issue was the idler pulley. First I began opening up the front panel based on a youtube video but soon realized the model was slightly different and required a lot more items to remove. I saw the pulley in the back with nothing in the way so I put the front panel crap back on and removed the rear panel. There it was, very simple to re
... Read moremove and replace. I'm not looking forward to drum rollers though. Hopefully they're aren't as difficult as they appear.
