The rack track stop on your dishwasher is designed to stop the dish rack at the appropriate place when opening and closing the rack. If your dishwasher is not cleaning your dishes properly, the rack s...
This manufacturer-certified heating element is used to create heat during the dry cycle and increase water temperature during portions of the wash cycle when certain options are selected. If your dish...
The mounting bracket is sold individually, without screws. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking,...
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This ...
This water inlet valve should be located behind the lower kick plate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.
This part acts as as safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches a certain point, this part will shut down power to the heating element.
This is a lower spray arm for a dishwasher. The lower spray arm allows water to be spread evenly throughout the dishwasher tub with the proper force so dishes come out clean. This spray arm is gray in...
Ask our experts a question about this model and we'll get back to you as soon as possible!
6 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bj
January 17, 2023
The dry heat is not coming to dry but when washing the element is coming on.
How do I get the dry to work
For model number WDF330PAHW4
Hello, thank you for contacting us. We would recommend checking the following parts to fix your issue: High Limit Thermostat, part number PS11743423, Turbidity Sensor, part number PS12070543, and Control Board, part number PS12070630. We look forward to hearing from you if you need assistance with placing an order through our 7-days-a-week customer service. We hope this helps!
Hi Donald, thank you for getting in touch. We have researched the model and would suggest checking the door actuator, part number PS11746083. It releases the door latch when you lift the handle. If your current door actuator is cracked or broken, it may cause the door to not close properly. The dishwasher also may not be able to start, and if this is the case, you may need to replace it. We hope this information helps!
Can I get a replacement cap for the rinse aid dispenser?
For model number WDF330PAHW4
Hi Gail, thank you for contacting us. The part you are looking for is the rinse aid cap, part number PS11755939. Let us know if you have further questions!
How do u remove filters to clean them; they won’t come out.
For model number WDF330PAHW4
Hello Gerri, Thank you for your inquiry. We do have videos on removing both filters and have included the links. You can also find each video under the description of each part. We hope this helps
Hi Jeff, thank you for reaching out. Based on our research, the cutout height for the model you mentioned is approximately 34 inches. Glad to be of assistance!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
I called an experienced plumber, who balanced and installed my new dishwasher properly, using the brackets I ordered from Parts Select, after an INEXPERIENCED plumber had tossed the factory-provided mounting brackets out with the shipping carton. Relief!
unscrewed dishwasher from cabinet ...,moved out slightly....while door closed ...reached with long nosed pliers door spring pulled forward...and allowing white plastic part that fits through sleeve and fit new sleeve over it...pulled spring attaching white plastic part and pushed unit back to cabinet and replaced screws DONE.
