UXT3030AAS Maytag Range Hood - Overview
Sections of the UXT3030AAS
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Range Hood Light Cover Lens
PartSelect #: PS11745125
Manufacturer #: WP8186930
This light lens cover is supplied by the original manufacturer for use with range hoods. It is a plastic rectangular cover measuring approximately 5.25 inches by 4 inches that protects the light bulb ...
$35.80
In Stock
Range Hood Exhaust Switch (Black)
PartSelect #: PS11740768
Manufacturer #: WP3147265
Discover the impact of an efficient appliance with this black fan control exhaust switch from the reliable household brand, Whirlpool. This genuine OEM part adds to your appliance's functionality and ...
$73.04
On Order
Rocker Switch
PartSelect #: PS11741002
Manufacturer #: WP31986601B
This switch is for the oven light and downdraft fan.
No Longer Available
Blower Motor Assembly
PartSelect #: PS11745127
Manufacturer #: WP8186945
Includes fan motor and blade.
No Longer Available
Receptacle, Light Bulb not incl-75W
PartSelect #: PS982034
Manufacturer #: 8190871
No Longer Available
Questions And Answers for UXT3030AAS
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the UXT3030AAS
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The switch on the exhaust fan for the grill part of the stove went bad. I found the part on your site easily , ordered it and got it within 4 days.
I simply looked at the new switch , to see how it fastened in the stove. It had plastic clips that were easily depressed to allow the swithch to be removed. I removed it , (after turning the circuit breaker off to the stove) removed the three wires , and replace them on the new switch and simply pushed it in the space. It snapped in place
... Read more
, and the job was done . Works great!
Read less
Parts Used:
-
Al from Abbeville, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
13 of 22 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Removing the old fan rocker switch on our Jenn Air gas range and replacing it with the new one
It is really easy to replace IF you know that the tabs that hold the switch in are ON THE TOP AND NOT ON THE SIDES. I wasted a lot of time prying on the sides to get the switch out. It would have been really easy if I had known the tabs were on the top and bottom.
Parts Used:
-
Donald from OURAY, CO
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!