TCS-3401 Tanaka Chainsaw - Overview
Models starting with TCS-3401
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Purge Bulb
PartSelect #: PS8857246
Manufacturer #: 12318139130
This OEM replacement part is used to pump fuel from the tank to the carburetor in order to start the engine. It may also be referred to as a Primer Bulb. It is made of durable black plastic and is sol...
$9.80
In Stock
Pump Filter Body
PartSelect #: PS17016301
Manufacturer #: 66A3864
This is a genuine OEM replacement part, it is sold individually. The Fuel Filter is inside of the fuel tank. Its purpose is to filter out dirt and other debris from contaminating the carburetor. It w...
No Longer Available
Pipe-fuel-2.5x4x105
PartSelect #: PS9993539
Manufacturer #: 6692353
This fuel pipe is manufactured for Tanaka gas powered handheld equipment. It is a genuine OEM sourced item, not an aftermarket imitation. This fuel pipe allows the gas to flow between the tank and the...
No Longer Available
Clip 7
PartSelect #: PS9993515
Manufacturer #: 6692312
The clip goes between the pump filter body assembly and the rubber pipe cap. This is an authentic part from Tanaka for use in bicycle engines, chainsaws, blowers, edgers, trimmers, brush cutters, and...
$5.28
Special Order
Clutch Spring
PartSelect #: PS9992295
Manufacturer #: 6689424
It is a high-quality replacement for a damaged or a missing clutch spring that allows the clutch to retract. Refer to the diagrams for your specific model to ensure the correct repair procedure. Keep ...
$6.40
Special Order
Small Washer 5
PartSelect #: PS9990376
Manufacturer #: 6684864
This is a genuine replacement part sourced from the original manufacturer for use with bicycle engines made by Tanaka. The user will need to replace this small washer if it is missing or not working c...
$4.23
Special Order
Bar Clamp Nut
PartSelect #: PS9990583
Manufacturer #: 6685166
This is an original Tanaka replacement part. The bar clamp nut is designed by the manufacturer for use in chainsaws, pruning saws, and hedge trimmers. This part is made of metal, and may be found in...
No Longer Available
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Bulb was worn out and broken open
The unit is a press fit. To remove the old one required breaking the plastic compression tabs that hold it in place. That was simple enough. Replacing requires lining up in the correct position to meet the inner hose. Then push it in. The compression tabs on the replacement click in and hold.in place.
Parts Used:
-
Richard from SPRING HILL, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
17 of 19 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!