Models > TC707S1

TC707S1 Jenn-Air Trash Compactor - Overview

Sections of the TC707S1

[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
15 Inch Compactor Bags - 15 Pack – Part Number: W10165295RP
15 Inch Compactor Bags - 15 Pack
★★★★★
★★★★★
(3)
PartSelect #: PS1964579
Manufacturer #: W10165295RP
Trash compactor bags are a practical way to discard your waste. Due to the extreme pressure of the compactor, trash compactor bags designed to handle the force are necessary. These bags are made from ...
$28.68
  In Stock
Drive Gear Kit – Part Number: 882699
Drive Gear Kit
★★★★★
★★★★★
(44)
PartSelect #: PS398589
Manufacturer #: 882699
This is the drive gear kit for the ram that compacts the trash inside your compactor. If your compactor ram is getting stuck, there is excess noise during its cycle, or if your compactor does not stop...
$61.26
  In Stock
Screw, 8/18 x 3/8 – Part Number: WP90767
Screw, 8/18 x 3/8
★★★★★
★★★★★
(2)
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$7.76
  In Stock
15" Paper Compactor Bags - 12 Pack – Part Number: 675186
15" Paper Compactor Bags - 12 Pack
PartSelect #: PS382653
Manufacturer #: 675186
Moisture-resistant liner. Pre-cuffed.   No Longer Available
Foot, Front - Single – Part Number: WPW10001130
Foot, Front - Single
★★★★★
★★★★★
(2)
PartSelect #: PS11747965
Manufacturer #: WPW10001130
The front facing foot is sold individually. It is used on your washing machine and can also be known as an adjustable leveling leg. This specific front facing leveling leg has a rubber foot. It is imp...
$7.48
  In Stock
15" Compactor Bag Carrier with Easy Grip Handles – Part Number: 13030RP
15" Compactor Bag Carrier with Easy Grip Handles
★★★★★
★★★★★
(10)
PartSelect #: PS1782408
Manufacturer #: 13030RP
This 15 inch compactor bag carrier fits around the compactor bag inside the compactor and is used to easily lift and remove trash compactor bags once they are full. Simply place the reusable bag carri...
$34.68
  On Order
Directional Switch – Part Number: WP777811
Directional Switch
★★★★★
★★★★★
(15)
PartSelect #: PS11744742
Manufacturer #: WP777811
The function of the directional switch on your trash compactor is to ensure the ram lowers to compress your trash, then returns to the top position. If your trash compactor does not complete this task...
$63.77
  In Stock
Charcoal Filter – Part Number: WP4151750
Charcoal Filter
★★★★★
★★★★★
(3)
PartSelect #: PS11742279
Manufacturer #: WP4151750
This part is sold individually. The filter is black in color and measures approximately 4-1/2 inches wide by 4-1/2 inches high. This part is for your trash compactor. This part acts as a filter and de...
$18.96
  In Stock
Touch-Up Paint - White – Part Number: 72017
Touch-Up Paint - White
★★★★★
★★★★★
(1)
PartSelect #: PS385132
Manufacturer #: 72017
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
$8.44
  In Stock
15 Inch White Plastic Compactor Bags - 60 Pack – Part Number: W10165294RB
15 Inch White Plastic Compactor Bags - 60 Pack
★★★★★
★★★★★
(2)
PartSelect #: PS1964577
Manufacturer #: W10165294RB
This is a 60-pack of plastic compactor bags. These bags are 15 inches wide, 3 millimeters thick and are white in color. The 3-millimeter thickness makes the bags more durable and helps prevent tearing...
$66.92
  In Stock
Screw – Part Number: WP489478
Screw
★★★★★
★★★★★
(1)
PartSelect #: PS11742754
Manufacturer #: WP489478
Sold individually.
$7.76
  In Stock
Drawer Roller – Part Number: WP9871602
Drawer Roller
★★★★★
★★★★★
(6)
PartSelect #: PS11747573
Manufacturer #: WP9871602
This bearing roller may also be known as the wheel assembly or the container roller bearing, and it is a piece for your trash bin. The function of this bearing is to work in conjunction with your tras...
$15.84
  In Stock

Questions And Answers for TC707S1

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the TC707S1

[Viewing 8 of 8]
Compactor ram gets stuck
Fixed by
these parts
Show All
Doesn’t stop at end of compacting cycle
Fixed by
these parts
Show All
Drawer is hard to open and or close
Fixed by
these parts
Show All
Noisy
Fixed by
these parts
Show All
Shakes and moves
Fixed by
these parts
Show All
Light not working
Fixed by
these parts
Show All
Won’t start
Fixed by
these parts
Show All
Won’t stay on
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Compactor stuck in lower position
Moved the compactor out from under cabinet and unplugged the powercable.Laid compactor over on its side Removed the top (4 screws) and base plate (3 screws) as well as the coverplate for the motor(3 screws)Found that large drive was broken in half. Used two screwdrivers to start split ring then pliers to pull it off the rest of the way.
Removed the drive gear and the washer.
Used a nail to drive out the pin for the smaller drive gear kit. Removed and replaced with new, used new pin to lock it on to the shaft. Changed out the bearings and washers on one powerscrew, put chain back on. Then was then a simple matter to put the new gear back on the chain then slide the whole thing back on the drive shaft. Replace the washer then slip the split ring back in place and seat it home with the pliers. Greased chain, gear drive and powerscrew. Put all covers back on with the screws. Pushed button it worked.
Parts Used:
Powerscrew Cap Drive Gear Kit Washer BEARING
  • Asbjorn from The Woodlands, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
65 of 77 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Trash Compactor ram wouldn't lower
I pulled the trash compactor out from under the counter.

I took out the four screws that kept the top cover in place to expose the ram.

The gear shafts were turning but the ram would not lower, at first I though the ram drive bolts were stripped and it wouldn't engage the shaft. Then I realized there was a mechanical directional\limit switch at the top that controlled the power and direction the gear shafts were turning, this switch was broken.

Just had to take off the front plate that was held on by a number of screws and replace the switch that was held on by two more screws. It had five wires attached to it, the new switch was clearly labeled as to which color wire went where.
Parts Used:
Directional Switch
  • Scott from Indianapolis, IN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
37 of 44 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Scratches in Surface
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Parts Used:
Touch-Up Paint - White
  • Michelle from Richardson, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
41 of 64 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!