TB230 Troy-Bilt Lawn Mower Parts & Repair Help | PartSelect
Models > TB230 (12AVB26M066 2010)

TB230 (12AVB26M066 2010) Troy-Bilt Lawn Mower - Overview

Sections of the TB230

[Viewing 1 of 1]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(8)
PartSelect #:PS9455101
Manufacturer #:734-04018C
This is a genuine OEM replacement part, it is sold individually. This is the front wheel on the models shown below. There are two of them on each mower. The wheel has a ring gear o...
$12.62
In Stock
(5)
PartSelect #:PS10036233
Manufacturer #:964-04117B
This grass bag comes in black fabric, and is manufacturer-certified and individually sold. It's used to collect grass clippings. If there are any holes in our bag, you'll need to r...
$40.53
Special Order
PartSelect #:PS9169783
Manufacturer #:942-0741A
This is an authentic replacement part manufactured for use with Craftsman walk-behind lawnmowers. The blade is angled to allow the clippings to rotate through the cutting deck to p...
$18.80
In Stock
(5)
PartSelect #:PS9454662
Manufacturer #:731-07131
The Side Discharge Chute is a manufacturer certified black plastic part used to direct glass clippings out from unde the deck of the mower, which is rated as "Easy" to install. If ...
$11.39
In Stock
(1)
PartSelect #:PS10033966
Manufacturer #:946-04661A
$9.79
In Stock
PartSelect #:PS10037714
Manufacturer #:987-02516A
This OEM Hinged Mulch Plug Assembly includes both the plug and the spring. It is a black, plastic assembly which is rated as "Easy" to install, requiring a screwdriver, and socket ...
$15.47
In Stock
(2)
PartSelect #:PS10023414
Manufacturer #:911-04144B
Axle assembly attaches the rear wheels to the mower and allows the wheels to rotate. This part replaces part numbers 911-04144 and 911-04144A. Wear work gloves to protect your h...
No Longer Available
PartSelect #:PS9298768
Manufacturer #:710-0599
$3.99
In Stock
PartSelect #:PS9119111
Manufacturer #:736-0524B
The Blade Support (Bell Blade Support) fits between the bottom of the blade and the blade bolt to provide support for the blade. It is installed underneath the cutting deck on the ...
$4.81
In Stock
(1)
PartSelect #:PS9988561
Manufacturer #:647-04271-0637
No Longer Available
Questions and Answers for TB230
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the TB230

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Not the exact fit

Wheel-Gear – Part Number: 734-04018C
  • Customer: Jay from GERRY, NY
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required:
  • 2 of 2 people found this instruction helpful
I had to drill and tap the ends of the axle and put a 1/4” bolt in to fasten the wheels. The hubs were not the same. They fastened differently. read more

The treads on the front drive wheels were worn down to the point that they provided little traction.

Wheel-Gear – Part Number: 734-04018C
  • Customer: MICHAEL from Kennewick, WA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 1 of 1 people found this instruction helpful
Removed a single nut on each end of the drive shaft with the appropriate socket. Wheels then slipped off. Cleaned/polished the shaft with fine sandpaper, lubed with silicone spray, slid on the wheels and reinstalled the nuts with the same socket. Wheels were an exact fit and OEM quality. Done in 15 minutes start to finish. read more