T282X Shindaiwa Trimmer - Overview
Models starting with T282X
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Purge Bulb
PartSelect #: PS8858167
Manufacturer #: 12318140630
The Primer Pump, aka the Pump Bulb, is a clear, individually sold, plastic part, sourced from the original equipment manufacturer. It has an Outer Diameter of 0.616 Inches, 15.66mm and is 0.558 Inches...
$7.30
In Stock
Trimmer Fuel Return Tube
PartSelect #: PS8862036
Manufacturer #: 13201056330
The fuel return tube or fuel return line, as it is also known, delivers fuel back to the tank from the primer bulb. This is a genuine OEM part from the manufacturer, and it is yellow in color and sold...
$6.40
In Stock
Fuel Filter Assy.
PartSelect #: PS16478678
Manufacturer #: A369000460
The Fuel Filter is a white and silver, individually sold, steel part. It reuires pliers to install and its installation is rated as Easy.
The part attaches inside of the fuel tank and is used to cle...
$11.70
In Stock
Air Filter
PartSelect #: PS12088681
Manufacturer #: A226000473
This is an original Echo replacement part. The single layer air filter is designed by the manufacturer for use in power pruners and blowers. This part is made of mesh in a plastic frame, and is used...
$12.30
In Stock
Fuel Line Clip
PartSelect #: PS10053748
Manufacturer #: V490001230
Used in over 150 models of outdoor power equipment, this clip is commonly used to clip fuel lines or other hoses/tubes in place. It is sold individually, not as part of a kit or assembly, made of meta...
$6.40
In Stock
Trimmer Nut
PartSelect #: PS9148697
Manufacturer #: 90050000005
This OEM nut is a 5mm, gold, metal nut, which is sold individually. It can be installed with a Wrench or Socket and Torque Wrench by torquing to the manufacturer specifications. This nut is used to se...
$6.40
In Stock
Breather Assembly
PartSelect #: PS9314032
Manufacturer #: A356000040
This breather, also known as a fuel tank vent, is a genuine OEM replacement part used in trimmers and edgers. It is responsible for managing the pressure and air flow inside the fuel system, by acting...
$8.41
In Stock
Gasket
PartSelect #: PS9237390
Manufacturer #: V107000010
This individually sold fuel gasket is designed for use with handheld lawn and garden equipment and is the seal for the gas cap. This gasket is a genuine OEM part made of a composite material and will ...
$6.40
In Stock
Spring
PartSelect #: PS11836780
Manufacturer #: V450001880
This is a genuine replacement part that has been OEM sourced to ensure quality. The metal spring is intended to be used with trimmers from Shindaiwa and Echo. This spring is used within the cutting he...
$6.40
In Stock
Spring Retainer
PartSelect #: PS10053754
Manufacturer #: V494000840
This is an authentic OEM sourced replacement part. The spring retainer is intended to be used with trimmers from Shindaiwa and Echo. The retainer is used to support the spool's compression spring with...
$6.40
In Stock
Clip
PartSelect #: PS9238696
Manufacturer #: V490000500
This OEM Clip is a silver, steel part, which is sold individually. The part secures the fuel line to the fuel filter and is rated as Easy to install.
You will know you need a new one if there is a l...
$6.40
In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Replace clogged fuel filter.
Thru fuel cap, insert copper wire with hook formed on end. Fish around until you grab the fuel line. Pull the fuel line and filter thru the fuel fill neck.
Pull off old filter and replace with new. Push back into fuel tank & be done.
Pull off old filter and replace with new. Push back into fuel tank & be done.
Parts Used:
-
Keith from NORWOOD, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
24 of 42 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking fuel down handle from carburetor
Removed screws from filter housing and two screws holding the base assembly which has the choke plate and lever on it. Old plate had bad design choke plate that vibrated closed in operation. New plate much better design and completely solved problem.
Parts Used:
-
Gary P from FRISCO CITY, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!