ST224 Husqvarna Snow Blower - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Plastic brackets that hold the cables to control the speed, direction and snow chute broke on the console.
We had to take all of the cables off the old console. Remove the console off the blower, replace with the new console ordered from PartSelect and replace it.
After that, reconnect all of the cables, make sure they work and they weren't too tight so they wouldn't break the brackets on the new console. Replacement was a success and the snowblower is back working like new.
After that, reconnect all of the cables, make sure they work and they weren't too tight so they wouldn't break the brackets on the new console. Replacement was a success and the snowblower is back working like new.
Parts Used:
-
Gerald from Seaford, DE
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Chunk of wood broke the lower plastic chute.
Removed belt cover. Unbolted upper chute mount and removed metal upper chute with cables still attached. Replaced plastic lower chute, 4 bolts and reassembled machine.
Parts Used:
-
Jason from Cummington, MA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
2 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!