SMU53M08EU Bosch Dishwasher - Overview
Models starting with SMU53M08EU
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Dishrack Roller - Grey
PartSelect #: PS8727387
Manufacturer #: 00611475
This dishrack roller is a genuine replacement part designed for the lower rack of select dishwashers. Made from durable gray plastic and measuring slightly over one inch in diameter, it features an in...
$13.76
In Stock
SEALING
PartSelect #: PS18375762
Manufacturer #: 12054183
This seal is also referred to as a door gasket, and it is designed for use on dishwashers. It is installed on the door of the appliance, and it seals the space between the tub of the dishwasher and th...
$16.88
In Stock
Drain Pump - 55Hz
PartSelect #: PS8727352
Manufacturer #: 00611332
The pump ejects the water from the dishwasher through the drain hose.
$58.66
In Stock
Door Switch/Sensor
PartSelect #: PS8727335
Manufacturer #: 00611312
This dishwasher door switch ensures safe and efficient operation by detecting when the door is securely closed. It prevents leaks and allows the appliance to start only when properly latched. If your ...
$36.93
In Stock
LOCK
PartSelect #: PS12586896
Manufacturer #: 10006917
If your dishwasher won’t start or the door won’t latch, the door lock assembly might be the issue. This part is made for Bosch, Thermador, and Gaggenau dishwashers, and may fit some Kenmore models too...
$38.07
In Stock
LID
PartSelect #: PS8727344
Manufacturer #: 00611322
This drain pump cover is a genuine OEM component designed to channel water from the sump to the drain pump in select dishwashers. Made from durable gray plastic with a white handle, it ensures proper ...
$23.12
On Order
GUIDE
PartSelect #: PS8728859
Manufacturer #: 00623536
This dishwasher door cable guide helps ensure the door opens and closes smoothly by directing the movement of the door cable and spring assembly, keeping the door properly balanced during use. Sold as...
$18.76
In Stock
Dishwasher Door Hinge Lever Bearing
PartSelect #: PS8697061
Manufacturer #: 00165296
This door hinge lever bearing is for dishwashers. Door hinge lever bearing allows the door hinge lever to move smoothly.
$16.26
In Stock
SUMP
PartSelect #: PS8732950
Manufacturer #: 00668102
This dishwasher sump assembly is a vital component responsible for collecting and circulating water within the appliance. Positioned beneath the tub, it gathers water and food debris, channeling the f...
$90.06
In Stock
Common Symptoms of models starting with SMU53M08EU
[Viewing 8 of 8]Leaking
Fixed by
these parts
these parts
Show All
Not draining
Fixed by
these parts
these parts
Show All
Door latch failure
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Door won’t close
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Not cleaning dishes properly
Fixed by
these parts
these parts
Show All
Will not dispense detergent
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
rollers broke
pushed with thumb pressure and snapped rollers into place.....EASY
Parts Used:
-
Dennis from PLEASANTVILLE, NJ
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
15 of 22 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dishwasher not draining, dishes dirty
replacing the sensor was simple, just unplug and turn it out, but didn't solve the problem, it's a float sensor that doesn't show up on the tech sheet in the dishwasher or anywhere in troubleshooting on the internet I could find.
Parts Used:
-
Daniel from AUBURN, IN
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
9 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water was leaking below the door. The gasket that seals the door shut was torn from wear and needed replacement
I removed the old gasket easily, it pulled right out. I spent a few minutes cleaning the gunk out from the seam using a standard kitchen cleaner (it was gross and I had to do it multiple times). Tip: pay attention to the shape of the gasket and which side faces in vs. out when pulling out the old one. Also, for reference, take a photo of
... Read more
the old gasket and how it's positioned before pulling it out. Then, simply start at the bottom (either side) and insert the new gasket. Work your way up, over and down the other side. If it's facing the right way it'll go in very easily, if not is will be very difficult—this is how you'll know. After installation, run your dishwasher empty for a full cycle (with towel underneath the door) and check back frequently during the cycle. If there are no leaks you're done. This was the fastest, easiest way to attempt to fix a leaky door and eliminate the gasket as the problem (which it did!) If the machine still leaks the issue is likely something bigger.
Read less
Parts Used:
-
David from FALMOUTH, ME
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
6 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!