SHPM78W56N Bosch Dishwasher - Overview
Models starting with SHPM78W56N
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Dishrack Roller - Grey
PartSelect #: PS8727387
Manufacturer #: 00611475
This dishrack roller is a genuine replacement part designed for the lower rack of select dishwashers. Made from durable gray plastic and measuring slightly over one inch in diameter, it features an in...
$13.76
In Stock
BOSCH
PartSelect #: PS18375489
Manufacturer #: 10040888
This wheel for the lower rack of your dishwasher, it includes the brushing you will need for installation; the axel is not included. You need to line the replacement wheel up with the axel, slide it i...
$110.24
On Order
Mounting Bracket
PartSelect #: PS8728568
Manufacturer #: 00619985
Sold individually.
$10.00
In Stock
Lower Dishrack
PartSelect #: PS18375870
Manufacturer #: 20007189
This lower dishrack is a high-quality replacement component designed to restore full functionality and organization to compatible Bosch, Thermador, Gaggenau, and select Kenmore dishwashers. Constructe...
$131.77
In Stock
FILTER-MICRO
PartSelect #: PS8730270
Manufacturer #: 00645038
This micro filter is a genuine OEM replacement part that is compatible with dishwashers. Its primary function is to catch and trap small particles of food, debris, and other contaminants that may be p...
$40.91
In Stock
SEALING
PartSelect #: PS18375762
Manufacturer #: 12054183
This seal is also referred to as a door gasket, and it is designed for use on dishwashers. It is installed on the door of the appliance, and it seals the space between the tub of the dishwasher and th...
$16.88
In Stock
Access Valve
PartSelect #: PS16746057
Manufacturer #: 10023852
This water access valve, also known as a water inlet valve, is an authentic OEM replacement part used in dishwashers. The valve controls the flow of water into the dishwasher. It is responsible for al...
$30.62
In Stock
Dishwasher Spray Arm
PartSelect #: PS8737036
Manufacturer #: 00745856
This OEM upper spray arm is sourced directly from the manufacturer for use in various models of dishwasher. It is responsible for spraying water onto the dishes that are placed in the top rack. It is ...
$28.42
In Stock
Dishwasher Circulation Pump with Heater
PartSelect #: PS11724988
Manufacturer #: 12008381
This heat pump assembly is a vital component for select Bosch, Thermador, and Gaggenau dishwashers, combining circulation and heating functions to ensure effective cleaning performance. It pumps water...
$134.22
In Stock
CROCKERY BASKET
PartSelect #: PS18011534
Manufacturer #: 20007068
This upper dishrack assembly is designed to fit select models of Bosch, Thermador, and Gaggenau dishwashers. Engineered for durability and optimal performance, it features multiple tine rows to secure...
$133.70
In Stock
Dishwasher Hosedrain
PartSelect #: PS8737004
Manufacturer #: 00744881
This dishwasher drain hose is designed to transport wastewater from the appliance to the household plumbing system, ensuring proper drainage and preventing water retention. Constructed for durability ...
$27.50
In Stock
HOLDER
PartSelect #: PS8728043
Manufacturer #: 00616990
Introducing the Dishrack Tine Row Holder from Bosch, a high-quality, authentic OEM part designed for dishwashers. This particular component is known for its compatibility with various models from the ...
$6.25
In Stock
Common Symptoms of models starting with SHPM78W56N
[Viewing 10 of 10]Leaking
Fixed by
these parts
these parts
Show All
Not draining
Fixed by
these parts
these parts
Show All
Not cleaning dishes properly
Fixed by
these parts
these parts
Show All
Not drying dishes properly
Fixed by
these parts
these parts
Show All
Door latch failure
Fixed by
these parts
these parts
Show All
Door won’t close
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Will not fill with water
Fixed by
these parts
these parts
Show All
Will not dispense detergent
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
A prong in the bottom rack had broken nearly through where it attached to the base & was rusting severely. Several other prongs had also started to rust.
The bottom rack of our Bosch dishwasher was discontinued & no longer available anywhere, so we ordered an OEM replacement rack from PartSelect.com & hoped that it would fit.
The new rack fits perfectly & is actually an improvement over the old one. The new rack doesn't have a vase tower, but that is actually a big design impr ... Read more ovement because it can store more dishes & is more flexible than the old one. The new rack comes without a handle cover, but it was very easy to move the handle cover from our old rack to the new one.
The new rack fits perfectly & is actually an improvement over the old one. The new rack doesn't have a vase tower, but that is actually a big design impr ... Read more ovement because it can store more dishes & is more flexible than the old one. The new rack comes without a handle cover, but it was very easy to move the handle cover from our old rack to the new one.
Read less
Parts Used:
-
Patricia from DALLAS, TX
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
50 of 58 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
E:15 error code with Watertap
The E:15 error code means water is detected in the pan under the unit. There are several ways this can happen.
In this case, it was caused by a bad inlet valve. It did not close properly and led to an overflow of water inside that eventually spilled into the pan underneath the unit.
I see now why the pump keeps run ... Read more ning after this error. In this case, it would have led to a big flood in the kitchen if it did not.
I was actually able to run the unit while broke by manually operating the valve under our sink that provides water to the unit.
Be sure to turn off breaker before servicing. Don't get shocked!
Be sure to turn off water before starting! Or, you'll have a flood.
Anyway, I just pulled the unit out (was secured by 2 screws on the sides). I lifted up the insulation material on the left side to get at the valve. Pushed a little green tab to release the electrical plug. Then, use pliers to move clamp off the white water hose on the inside. Then, pull of white hose. This was hard in my case. Took a lot of force. Then, reach behind the unit and use pliers to unscrew water hose. Now, the whole gray panel there can pop out with some force. Then, slip the old valve out and slip new one in. Reconnect hoses and clamp. Note that I put some caulk on the connector where white hose goes. Not sure if needed or not.
Good luck!
In this case, it was caused by a bad inlet valve. It did not close properly and led to an overflow of water inside that eventually spilled into the pan underneath the unit.
I see now why the pump keeps run ... Read more ning after this error. In this case, it would have led to a big flood in the kitchen if it did not.
I was actually able to run the unit while broke by manually operating the valve under our sink that provides water to the unit.
Be sure to turn off breaker before servicing. Don't get shocked!
Be sure to turn off water before starting! Or, you'll have a flood.
Anyway, I just pulled the unit out (was secured by 2 screws on the sides). I lifted up the insulation material on the left side to get at the valve. Pushed a little green tab to release the electrical plug. Then, use pliers to move clamp off the white water hose on the inside. Then, pull of white hose. This was hard in my case. Took a lot of force. Then, reach behind the unit and use pliers to unscrew water hose. Now, the whole gray panel there can pop out with some force. Then, slip the old valve out and slip new one in. Reconnect hoses and clamp. Note that I put some caulk on the connector where white hose goes. Not sure if needed or not.
Good luck!
Read less
Parts Used:
-
Raymond from VIENNA, VA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers
44 of 66 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The middle rack was rusting and some of the pegs were coming off.
Removed the spray arm, front handle, and little clips from the old rack and installed onto the new rack. Was very simple.
Parts Used:
-
Susan from MIDDLEBURY, VT
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
19 of 24 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!