This is a replacement dishrack roller or wheel for your dishwasher. It is made of gray plastic, measures a little over an inch in diameter, and is sold individually. This roller is designed for the lo...
This micro filter is a genuine OEM replacement part that is compatible with dishwashers. Its primary function is to catch and trap small particles of food, debris, and other contaminants that may be p...
This seal is also referred to as a door gasket, and it is designed for use on dishwashers. It is installed on the door of the appliance, and it seals the space between the tub of the dishwasher and th...
This is a door handle, which is is installed at the top of your dishwasher door and allows you to open and close it. However, if this part is missing or broken, the opening and closing your dishwasher...
This OEM upper spray arm is sourced directly from the manufacturer for use in various models of dishwasher. It is responsible for spraying water onto the dishes that are placed in the top rack. It is ...
This water access valve, also known as a water inlet valve, is an authentic OEM replacement part used in dishwashers. The valve controls the flow of water into the dishwasher. It is responsible for al...
This circulation pump with heater is for dishwashers.
Circulation pump with heater moves heated water through the spray arm to clean the dishes.
Unplug the dishwasher before installing this part...
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lee
January 20, 2023
This dishwasher starts but any cycle I choose the cycles stops exactly after 3 minutes as per the timer. Can hear humming but the clock stops
For model number SHPM65W55N
Hello Lee, Thank you for your inquiry. The appliance will stop mid-cycle if the door is not closed properly. Ensure that the door is shut firmly and the latch engages fully. Check if the rear panel is being pressed in, for example by a hose holder, which has not been removed, and check the seal. It could also be an issue with the door lock assembly, the door switch, or the circulation pump. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. We hope this assists you with your repair.
I am looking for a wiring diagram and a piece for the front panel of this dishwasher. Someone took it apart to fix a dent and now we don't know how to wire it back. Also i need a piece for that as well. I an send pics if necessary. Yellow cord with plug ins on both ends. Can someone help me?
For model number SHPM65W55N
Hello Diane and thanks for writing.
For more specialized assistance or to speak with someone about this, we would suggest calling the manufacturer of the unit directly. Once you get the information you need, we should be able to find the information on our site for you. We hope this helps Bosch 800-503-5028 We do carry related parts for units just like yours. For example, part number PS8727387 Good luck with your repair.
Hello Bob, Thank you for the question. This Error normally indicates a high water pressure. The water pressure should be in the range from 0.03 to 1 MPa. We hope this helps.
Was this helpful?
Thank you for voting!
Matt
December 28, 2022
Hi there, the very top rack of my dishwasher broke and I’m looking for a replacement. I can’t seem to find where I can buy it? Just for clarification it’s the top silverware rack.
For model number SHPM65W55N
Hi Matt,
Thank you for your question. The part number listed under your model number for the cutlery drawer is PS12075275. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
My new dishwasher has stainless steel door panel. Can I swap it for a fingerprint proof one? It's driving me crazy
For model number SHPM65W55N
Hello Terry, thank you for your question. There is not a fingerprint proof. It comes in Stainless, Black PS11758443 and White PS11758441. We are pleased to have been able to help.
The E:15 error code means water is detected in the pan under the unit. There are several ways this can happen.
In this case, it was caused by a bad inlet valve. It did not close properly and led to an overflow of water inside that eventually spilled into the pan underneath the unit.
I see now why the pump keeps run
... Read morening after this error. In this case, it would have led to a big flood in the kitchen if it did not.
I was actually able to run the unit while broke by manually operating the valve under our sink that provides water to the unit.
Be sure to turn off breaker before servicing. Don't get shocked!
Be sure to turn off water before starting! Or, you'll have a flood.
Anyway, I just pulled the unit out (was secured by 2 screws on the sides). I lifted up the insulation material on the left side to get at the valve. Pushed a little green tab to release the electrical plug. Then, use pliers to move clamp off the white water hose on the inside. Then, pull of white hose. This was hard in my case. Took a lot of force. Then, reach behind the unit and use pliers to unscrew water hose. Now, the whole gray panel there can pop out with some force. Then, slip the old valve out and slip new one in. Reconnect hoses and clamp. Note that I put some caulk on the connector where white hose goes. Not sure if needed or not.
I removed the 3 #20 torn screws in the handle, and the six #20 tore screws inside the door that hold the outer door skin in place.
The plastic handle has a series of molded hooks that allow it to snap into the stainless steel skin.
To avoid damaging the skin, use a utility knife to cut behind the two large hooks o
... Read moren the bottom of the handle and the one on each end. One trimmed, the handle easily slides out of the door skin.
The new one will effortlessly snap in-place, then reposition the door skin and fasten with the 9 screw previously removed.
