This wheel is a dishwasher rack wheel designed for the upper rack of your appliance. The roller wheel is approximately 1.25 inches in diameters and includes the brushing you need for installation. It ...
A holder is used in dishwashers, it is known as the dishrack stop kit. This kit comes with both the front and the rear stop, these parts are installed at either end of the rails that the upper rack sl...
This wheel kit is used for the lower rack of your dishwasher. The kit includes 8 wheels and axels. To install you can simply clip the wheel onto the frame. There are eight wheels on the lower rack in...
This part is the replacement screw for your washer. The head is approximately 1/4 inch in diameter and the screw is approximately 3/4 inch in length. It is made of metal and is sold individually. This...
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Vito
January 11, 2023
The heater of the sanitizing cycle is not working,so mash. Is not washing dishes at all.
For model number SHE3AR52UC/07
Hello Vito, thank you for contacting us. The issue is most probably related to a faulty heat pump, part number PS8736200. It heats and moves heated water through the spray arm to clean the dishes. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
Insaid heater for sanitizing ant proper washing of the dishes ken not be loceted
For model number SHE3AR52UC/07
Hi Vito,
Thank you for your question. The heater is part of the circulation pump. The part number listed under your model number for the circulation pump is PS8736200. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Our Bosch dishwasher has code e 09. Heating element. Which part do I order for this model?
For model number SHE3AR52UC/07
Hi Jill, thank you for reaching out. According to our research, the e09 error indicates the heating element is defective and needs replacement. In your appliance, there is no heating element, your appliance comes with a heat pump, part number PS8736200. We hope this helps!
Does the parts listed under your Model #SHE3AR52UC/07 Bosch dishwasher fit the dishwasher Model #SHE3AR52UC/08 ? The "/08" does not come up on a parts search. looking for both door seals.
For model number SHE3AR52UC/07
Hello Carl, thank you for reaching out to PartSelect Canada. According to our research, the part list for both the models is same. The door lower seal, part number PS8733125, and the door seal, part number PS8730289, are compatible with your model. If you need help placing an order, customer service is open 7 days a week!
We let this go for a shameful amount of time before I decided I could probably fix it. The roller broke so you could only pull it out about halfway or it would come off the track. I looked up the part, and bought it. Actually bought two in case it happened again. When I arrived I looked at how it was put together on the other side and t
... Read morehen just basically pushed it onto the rod and it was fixed. I am ashamed it took so long to do it. Never be afraid to try it yourself. It was a total of $10 shipped to fix it.
disconnected inlet hose and water line from sink, removed old inlet valve and installed new valve and reconnected inlet hose and water line from sink - checked for leaks.
This was the third time I replaced a fill valve in a Bosch diswasher, twice in this unit and once in a previous unit. I read the installation hints on your web site and want to add the following suggestion.
The notes on your web site say you can remove the valve from behind the toe face and pull it out to reach the hose and plu
... Read moreg. I found that the Bosch designers called for both the hose and wire to on the short side. I found that pulling the dishwasher forward 6" to 9" allows you to access these connections from the side at least to hold them while making the connection. I hope this helps. Thank you, Bill