This spool retainer is sourced from the equipment manufacturer for use in trimmers. It is a plastic knob, measuring 2 inches in diameter, with a threaded metal bolt in the center. The retainer has a r...
This grass deflector acts like a shield so that grass clippings are directed away from you and the surrounding areas while you are operating your trimmer. It is often located near the bottom of your t...
This carburetor is for line trimmers.
Carburetor mixes air and gas before the fuel mix goes to the engine.
Wear work gloves to protect your hands and work in a well-ventilated area during this repair.
Remove air cleaner cover and filter, remove air box base (2 bolts). Simply reverse order to reinstall. Side notes: 1) The air box itself comes complete with a new filter, so no need to order that separately unless you want some spares. They're only $0.86 each anyway, so you might as well while you're at it. 2) Part was perfect in fit and
... Read morefunction. 3) The prices here are so ridiculously low, I don't know how they make any money. I'll most definitely be back!
Remove carb cover, remove 2 t25 torx head screws. ( they are loctite in so they may be difficult). flip up carb, install new carb. swap gas fill and return lines to carb. choke and start, go to work.
Once I was able to see the problem. I had to make modifications so it could be used. It took awhile to figure out the problems. With a drill motor and metal bit I was able to get the boom where I could use it.
