RY34007 (090432017) Ryobi Trimmer - Overview
Sections of the RY34007
[Viewing 4 of 4]
Keep searches simple, eg. "belt" or "pump".
Bump Knob
PartSelect #: PS12626741
Manufacturer #: 308042002
This spool retainer is sourced from the equipment manufacturer for use in trimmers. It is a plastic knob, measuring 2 inches in diameter, with a threaded metal bolt in the center. The retainer has a r...
No Longer Available
UPPER BOOM ASSEMBLY
PartSelect #: PS18783782
Manufacturer #: 308470060
This is a genuine item that is sourced directly from the parts manufacturer for use with a Ryobi string trimmer. The upper boom assembly connects the motor head to the lower boom assembly. This part i...
No Longer Available
Grass Deflector Assembly
PartSelect #: PS10051753
Manufacturer #: T308744001
This grass deflector acts like a shield so that grass clippings are directed away from you and the surrounding areas while you are operating your trimmer. It is often located near the bottom of your t...
No Longer Available
Curved Shaft Assembly
PartSelect #: PS11857289
Manufacturer #: 307486001
Discover the Curved Shaft Assembly from Ryobi, created exclusively for enhancing the performance of your power equipment. This specialized component is key to efficiency and precision in your gardenin...
No Longer Available
Fuel Tank Assembly
PartSelect #: PS9939129
Manufacturer #: 310585012
Introducing a superb addition to your tool kit - the Ryobi Fuel Tank with Cap. This high-quality product is designed and built by Ryobi, a renowned brand known for its long-lasting tools and parts. Th...
No Longer Available
STRAIGHT SHAFT ASSEMBLY
PartSelect #: PS18783685
Manufacturer #: 308035047
Discover the unrivaled functionality of Ryobi's Straight Shaft Assembly. Designed with precision and superior engineering, this Straight Shaft Assembly is a valuable addition to your toolbox, promisin...
$24.63
In Stock
Switch
PartSelect #: PS16431030
Manufacturer #: 760961002
This OEM switch is used on a variety of different lawn equipment models and is sold individually. This switch is used to turn your lawn equipment on and off, so if your equipment is either not turning...
$6.40
In Stock
Trimmer String Head Adapter
PartSelect #: PS9995861
Manufacturer #: 678019002
Genuine OEM replacement part, this part is sold individually. This part is where the stringhead assembly is mounted on the Trimmers shown below. It attaches to the spindle. The thread mount on the sp...
No Longer Available
SPRING
PartSelect #: PS18788699
Manufacturer #: 679958001
This spring is a genuine OEM replacement part supplied directly from the manufacturer. It is designed for use in various models of Ryobi string trimmers. This coil type compression spring is placed in...
$6.40
In Stock
Fuel Filter
PartSelect #: PS16325093
Manufacturer #: 310976001
This fuel filter is a genuine OEM part that is compatible with various lawn equipment models and is sold as an individual part. Fuel filters are used to remove dirt and debris from fuel entering the c...
$2.99
Special Order
AIR FILTER
PartSelect #: PS18789678
Manufacturer #: 901723001
This is an air filter for a wide range of trimmers. Air filters are designed to prevent dust, dirt and debris from entering the carburetor and clogging and damaging the engine. This air filter is made...
$6.40
On Order
Common Symptoms of the RY34007
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Replaced straight shaft, and the gear head.
Removed the 2 bolts holding the gear head to shaft. On my model I had to remove the complete trimmer head, then using 2 wrench take the trimmer head adapter off the gear heD. One video showed simply putting a screwdriver in the notch behind trimmer head and unscrewing complete head. Mine of course was slightly more involved but still qui
... Read more
te easy once I saw what needed to be done.
Read less
Parts Used:
-
Tim from HOLLISTER, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Socket set
6 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No run on start up. sputters
Remove carb cover, remove 2 t25 torx head screws. ( they are loctite in so they may be difficult). flip up carb, install new carb. swap gas fill and return lines to carb. choke and start, go to work.
Parts Used:
-
MIKE from LOXAHATCHEE, FL
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old curved shaft for Ryobi had seized-up and wouldn't turn
I have been using string trimmers for over 40 years now, doing the grounds work at a small motel, and this is the best combination I have found!
I have the new 40V battery carbon fiber shaft model, but I use the curved shaft. I have stacked stone walls and many obstacles to get around, and the curved shaft works best. But, Ry ... Read more obi sends their straight shaft with the new trimmer, and it turns in the opposite direction (counter clockwise) and is hard for me to get into the areas I need.
To correct this, I use the Oregon brand Gatorhead, which fits on the Ryobi with no modiification (easy) and the line comes in spiral discs which can work for either direction of trimmer head to dispense effortlessly. Now, I have a new curved shaft on a new trimmer with the head turning in the clockwise direction.
This item has been discontinued, so get it when you find one, and stock up on line discs too!
https://www.oregonproducts.com/en/gator%c2%ae-speedload%e2%84%a2-trimmer-head-pro-sm/p/24-250
I have the new 40V battery carbon fiber shaft model, but I use the curved shaft. I have stacked stone walls and many obstacles to get around, and the curved shaft works best. But, Ry ... Read more obi sends their straight shaft with the new trimmer, and it turns in the opposite direction (counter clockwise) and is hard for me to get into the areas I need.
To correct this, I use the Oregon brand Gatorhead, which fits on the Ryobi with no modiification (easy) and the line comes in spiral discs which can work for either direction of trimmer head to dispense effortlessly. Now, I have a new curved shaft on a new trimmer with the head turning in the clockwise direction.
This item has been discontinued, so get it when you find one, and stock up on line discs too!
https://www.oregonproducts.com/en/gator%c2%ae-speedload%e2%84%a2-trimmer-head-pro-sm/p/24-250
Read less
Parts Used:
-
Mark from MANCHESTR CTR, VT
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Wrench (Adjustable)
1 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!