Models > RS520P7766606M > Instructions

RS520P7766606M Amana Microwave - Instructions

All Instructions for the RS520P7766606M

tray glass floor broke

Remove old tray, clean old caulk, and clean inside of microwave, Place new tray-glass floor and caulk with heat resistant silicone. Easy project.

Parts Used:

Glass Floor Tray

Eduardo from baltimore, MD
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins

4 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

broken tray-glass floor of microwave

very simple job. removed broken tray, inserted new tray and caulked around edges with a high heat resistant caulk.

Parts Used:

Glass Floor Tray

ted from lagrange, KY
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Plastic clip caused the rack to arc to the side of the cavity.

Pulled out the old clip and pushed in the new one. Only tool was my fingers and took about 20 seconds. This was after the Sear's web page said the part was no longer available and no replacement was listed.

Thanks to partselect.com I saved the microwave for another couple years.

Parts Used:

Metal Rack Support Clip

John from Marietta, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Magnetron shorted out blowed 15 amp fuse

removed cover of microwave, replaced fuse checked for short at plug with volt ohm meter, there was a short at the plug then checked magnetron for short and there was a short at the magnetron, the cap and diode checked good.

replaced magnetron IT IS WORKING GREAT !!

Parts Used: