EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
Back
Back
Back
Keep typing for more specific results...
Keep typing for more specific results...

RJGR3673A Maytag Cooktop - Overview

Sections of the RJGR3673A

[Viewing 4 of 4]
Keep searches simple, eg. "belt" or "pump".
Stainless Steel Cleaner – Part Number: 31462A
Stainless Steel Cleaner
PartSelect #: PS2360188
Manufacturer #: 31462A
Use this bottle of stainless steel cleaner and polish for any of your stainless steel appliances.
  No Longer Available
DISCONTINUED – Part Number: 70001761
DISCONTINUED
PartSelect #: PS2074574
Manufacturer #: 70001761
  No Longer Available
Oven Igniter – Part Number: 70001036
Oven Igniter
PartSelect #: PS2074089
Manufacturer #: 70001036
This part is used to light the oven for the bake or broil.
  No Longer Available
SWITCH, SPARK – Part Number: 70001058
SWITCH, SPARK
PartSelect #: PS2074110
Manufacturer #: 70001058
  No Longer Available
ORIFICE #5 – Part Number: 70001147
ORIFICE #5
PartSelect #: PS2074185
Manufacturer #: 70001147
  No Longer Available
ORIFICE #5 – Part Number: 70001056
ORIFICE #5
PartSelect #: PS2074108
Manufacturer #: 70001056
  No Longer Available
ORIFICE #4 – Part Number: 70001071
ORIFICE #4
PartSelect #: PS2074123
Manufacturer #: 70001071
  No Longer Available
GRATE  INC – Part Number: 70001589
GRATE INC
PartSelect #: PS2074477
Manufacturer #: 70001589
  No Longer Available
IGNITER- H – Part Number: 70001037
IGNITER- H
PartSelect #: PS2074090
Manufacturer #: 70001037
  No Longer Available
THERMOSTAT (OVEN) – Part Number: 70001042
THERMOSTAT (OVEN)
PartSelect #: PS2074095
Manufacturer #: 70001042
  No Longer Available
KNOB- THER – Part Number: 70001077
KNOB- THER
PartSelect #: PS2074128
Manufacturer #: 70001077
  No Longer Available
GUARD- SPL – Part Number: 70001083
GUARD- SPL
PartSelect #: PS2074134
Manufacturer #: 70001083
  No Longer Available

Questions And Answers for RJGR3673A

Be the first to ask our experts a question about this model!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Oven ignition switch failed
This is actually for a Dynasty (Jade) Range (but that's not an option in the selection).

The repair is very easy - after you shut power off to the stove.

1. Remove all the stove control knobs from the front panel.
2. Remove the 2 phillips head screws on either side of the front control panel.
3. Pull the front panel out about 3 inches to expose the back of the switch.
4. Use a flat head screwdriver to push the retention clips down and loosen the switch from the panel.
5. Move the 5 wires connected to the switch using pliers, one by one to the new switch.
6. Push the new switch into the panel.
7. Replace the panel and controls.
8. Restore power and test.
Parts Used:
SWITCH- PO
  • Leon from San Francisco, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!