RGB518PCD2CT Hotpoint Range - Overview
Sections of the RGB518PCD2CT
[Viewing 4 of 4]
Keep searches simple, eg. "belt" or "pump".
Double Burner Assembly
PartSelect #: PS232404
Manufacturer #: WB16K10026
Both burners are mounted on the same bracket.
$58.09
In Stock
Oven Rack
PartSelect #: PS8746173
Manufacturer #: WB48X20249
This metal oven rack provides a stable and durable surface for baking, roasting, and broiling inside your oven. Designed to fit select gas range and oven models, it promotes even heat circulation and ...
$77.43
In Stock
Broiler Pan - Large
PartSelect #: PS1517612
Manufacturer #: WB48X10056
This large broiler pan is found in the bottom of your oven and is used to catch drippings from broiling foods. This part includes the grate and bottom pan and is made of porcelain. The grate measures ...
$42.18
In Stock
Range Leg Leveler
PartSelect #: PS2339673
Manufacturer #: WB02K10182
Ensure the stability of your GE range with this leveling leg. An essential accessory for your appliance, it helps maintain balance and provides support. With its adjustable design, you have the abilit...
$16.88
In Stock
BOTTOM OVEN AND DEFLECTOR ASM
PartSelect #: PS16219595
Manufacturer #: WB35X37973
This bottom oven and deflector assembly is a durable metal panel designed to fit beneath the oven floor, protecting the bake element from spills while promoting even heat distribution for consistent c...
$94.38
In Stock
Range Screw
PartSelect #: PS222157
Manufacturer #: WB01T10008
This part is a replacement screw for your oven. It is made of black metal and is sold individually. This screw is approximately 1/4 inch in diameter and about 1/2 inch in length. It is designed to con...
$15.68
In Stock
Burner Grate - Black
PartSelect #: PS244181
Manufacturer #: WB31K10015
Sold individually.
$50.42
In Stock
Burner Knob
PartSelect #: PS225984
Manufacturer #: WB03K10035
Sold individually. This knob can accept a D-shaped shaft.
$64.21
In Stock
Natural Gas Orifice
PartSelect #: PS240693
Manufacturer #: WB28K10033
Sold individually.
$29.82
In Stock
Handle Spacer
PartSelect #: PS221948
Manufacturer #: WB01K10020
This spacer is located between the handle and the outside door panel. They are sold individually, and are usually recommended to be purchased in pairs.
$14.65
In Stock
Screw
PartSelect #: PS221932
Manufacturer #: WB01K10002
Size: 8-32 inch Sold individually.
$32.91
In Stock
Questions And Answers for RGB518PCD2CT
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the RGB518PCD2CT
[Viewing 5 of 5]Gas igniter glows, but will not light
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Element will not heat
Fixed by
these parts
these parts
Show All
Gas smell
Fixed by
these parts
these parts
Show All
Door won’t close
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
My old burners were beyond the point of coming clean and made my stove top look bad.
My husband and I simply took the burner units out of the packing, took the old ones off, put the new ones in. The new units needed to be leveled, but the leveling nuts included fit perfectly, and the entire repair took less than 15 minutes.
Parts Used:
-
Helen from Flemington, NJ
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
23 of 30 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Pies Boiled Over And Baked On Oven Bottom
Removed the two screws put the heat shield off the old one onto the new one put new bottom in and tightened two screws. Done #38. 69 Cost of part with shipping cost included.
Parts Used:
-
Marjorie from Yucca Valley, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
20 of 25 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burners were burning the pans and flames coming out at all different angles of the burner
The toughest part of the repair was the preparation to remove the old burners. As a result of the burning there was a carbon residue on the burners, on the gas outlet feed to the burners. This took some scrubbing and removing the carbon residue. Bits had burned onto the outlet and had to be scrapped off. Once all cleaned, replacing th
... Read more
e burners was easy just had to place the balancing nuts in place and put on the burners. One problem arose the hood of the stove did not go back in place after replacing the burners so I then removed the balancing nuts put back on the burners stove top hood fit back in place and burners operated properly. This part of the repair took five minutes.
Read less
Parts Used:
-
ANNE from HICKSVILLE, NY
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
13 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!