RFG29THDWP Samsung Refrigerator - Overview
Models starting with RFG29THDWP
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Door Mullion Spring
PartSelect #: PS4163672
Manufacturer #: DA81-01345B
The French door divider spring fits most Samsung French door style refrigerators. The spring applies tension between components in the refrigerator, which engages and retracts the door flap. This will...
$8.55
In Stock
Spring PIN - French
PartSelect #: PS4163673
Manufacturer #: DA81-01346A
This pin acts as a sleeve for the French door spring in a refrigerator. This is a genuine OEM part that is sold individually and works with the spring within the door mullion to seal the door shut. If...
$6.40
In Stock
Handle Mounting Screw
PartSelect #: PS4144145
Manufacturer #: DA61-03734A
This screw, known as a handle fixer, is used to keep the door handles on your refrigerator secure. This screw is a genuine OEM part that comes individually, and simply screws into place in your refrig...
No Longer Available
Water Filter
PartSelect #: PS4138224
Manufacturer #: DA29-00020B
The water in your home can contain impurities that affect its clarity, taste, smell, and safety. Water can contain dirt, rust, chlorine, or water-hardening minerals. These deposits can cause health is...
No Longer Available
Hinge
PartSelect #: PS4143931
Manufacturer #: DA61-03230B
This is a French door hinge that is compatible with various models of refrigerators and is used to control the mullion (long plastic strips) on the inside portion of the French doors. If you notice th...
$7.47
In Stock
Refrigerator Door Bin
PartSelect #: PS4174247
Manufacturer #: DA97-06419C
This door guard, commonly referred to as door shelf or bin, is specially made for Samsung refrigerators. It is an authentic OEM replacement part, sourced directly from Samsung to ensure the best fit w...
$87.98
In Stock
Ice Cube Tray
PartSelect #: PS4149221
Manufacturer #: DA63-02284B
The ice maker cube tray holds the water that comes from the ice maker during the process of it becoming ice. This part is white in color and made of plastic. All you will need for this repair is a fla...
$49.50
In Stock
Refrigerator Ice Maker Shut-Off Arm
PartSelect #: PS4144940
Manufacturer #: DA61-05435A
The ice maker shut-off arm stops ice production when the ice bin is full.
$12.85
In Stock
Evaporator Fan Motor
PartSelect #: PS4138376
Manufacturer #: DA31-00146E
This evaporator fan motor is in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated. When the evaporator ...
$140.82
In Stock
Ice Maker Assembly
PartSelect #: PS5575313
Manufacturer #: DA97-07603B
This is a 40W/120V ice maker assembly for your refrigerator. Ice maker assemblies are designed to continuously make ice cubes by supplying water through its valve, freezing it, and then ejecting the c...
$192.50
In Stock
Icemaker Assembly - 9 Cube
PartSelect #: PS5575307
Manufacturer #: DA97-07365G
This ice maker assembly in your bottom-freezer refrigerator automatically produces and dispense ice. It consists of a mold for 9 ice cubes, a control device, and a 12-pin wiring connection and housing...
$163.47
In Stock
Refrigerator Door Bin
PartSelect #: PS4176339
Manufacturer #: DA97-11483A
Door bin attaches to the inside of the refrigerator door and typically holds jars and bottles.
$86.96
In Stock
Common Symptoms of models starting with RFG29THDWP
[Viewing 5 of 5]Door won’t open or close
Fixed by
these parts
these parts
Show All
Ice maker not making ice
Fixed by
these parts
these parts
Show All
Fridge too warm
Fixed by
these parts
these parts
Show All
Ice maker won’t dispense ice
Fixed by
these parts
these parts
Show All
Ice maker dispenses too much ice
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Left side French Door flap on Samsung refrigerator didn't retract when closing.
OMG seriously! I stopped into my go-to appliance repair shop to ask about what might be needed to repair the problem with my refrigerator door. They said you will need to replace the Mullion Flap piece. Cost would be $250-300 with part, labor and service. I went on line to see if I could handle the repair process myself. I found a How to
... Read more
- U Tube video and turns out I only needed to replace a little spring and pin not the whole Mullion Flap. Went to Parts select, ordered the spring and pin and did the repair myself in about 5 minutes. Shipping was $7 so I ended up paying $13 total.
Read less
Parts Used:
-
HOLLIE from FORT WAYNE, IN
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
49 of 66 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Installation Video Incorrect
The installation video notes that the door mullion spring has a bent end, and that the bent end of the spring is to be inserted into the LOWER hinge. However, on my refrigerator door, the bent end of the door mullion spring must be inserted into the UPPER hinge in order for the door to function properly. (Also noted that in your video t
... Read more
he installer manually closed the door mullion rather than just closing the refrigerator door, another indication that the installation of the spring was incorrect.) After watching the video several times to confirm I was installing the door mullion spring according to the video instructions, I tried inserting the bent end of the door mullion spring into the upper hinge, which proved to be the correct installation of the door mull spring. What should have been a 5 minute repair turned into an ½ hour repair.
Read less
Parts Used:
-
Cheryl from PALATINE, IL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers
34 of 40 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Mullion Door spring-mullion remains open and must be manually folded in
Placed new spring pin and new spring in place with pliers-10 seconds tops. HOWEVER!! Your instruction video is INCORRECT. Spring must be placed opposite of video with bent side toward million otherwise million is flipped outward not held closed. Two frustrating days before I figured that out.
Parts Used:
-
Bruce from BEND, OR
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
12 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!