RF267ABWP (XAA-0000) Samsung Refrigerator - Overview
Sections of the RF267ABWP
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Ice Maker Assembly Kit
PartSelect #: PS4173396
Manufacturer #: DA97-05422A
The ice maker assembly in your refrigerator connects to the water source and is responsible for producing ice. If your ice maker is damaged, leaking, or not producing enough ice, you should consider r...
$237.77
In Stock
Refrigerator Evaporator Cover Grommet
PartSelect #: PS4153930
Manufacturer #: DA63-40167A
$6.25
In Stock
Questions And Answers for RF267ABWP
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the RF267ABWP
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Ice maker stopped making ice and made a repeating clicking sound
YouTube the video on how to replace the ice maker. Unplugged the fridge, one screw was removed to open a small cover panel to access where the ice maker was plugged in, unplugged the ice maker, pushed a small locking clip and pulled the old ice maker off the keyhole slots holding it in place removing it from the fridge. Did the steps in r
... Read more
everse and reinstalled the new one. Plugged the fridge back in and reset the fridge by holding the energy saver and alarm button on the front door simultaneously for 8-10 seconds until it beeped. Took a few seconds and the fridge reset
Read less
Parts Used:
-
Robert from AKRON, OH
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Not making ice. Making ice slowly. Clicking sound when making ice.
(1) Set ice production to OFF from the front panel of the refridgerator. (2) Inside the fridge, remove the screw holding the panel covering the cable for the ice naker assembly. (3) Remove the panel. (4) Disconnect the power cable of ice maker. (5) Holding the assembly with one hand, release the locking clip of assembly housing, and slide
... Read more
assembly forward until it is free. (6) Remove the ice maker assembly. (7) Install the new assembly by reversing the previous steps. (8) Reset the ice maker by pressing the reset button and holding it for at least 8 seconds. The first time the ice maker is primed with water, there are 2 chimes. (1 High , 1 Low).
Read less
Parts Used:
-
Gregory from North Richland Hills, TX
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!