Models > RF1052BS > Instructions

RF1052BS (ASTLLGA) LG Range - Instructions

All Instructions for the RF1052BS

wouldn't turn on

simply take picture b4 you start then replace same way.

WARNING!!! MAKE SURE YOU HAVE RIGHT PART!! They are very slow to return any type of credit

Parts Used:

Radiant Heater

Michael from MILWAUKEE, WI
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

No power to unit after self clean was ran.

Unscrewed the back panel and Sub assembly then unplugged the board and replugged and put back screws. The ribbon wires were kinda hard to put back in make sure they are in all the way. Check the therm fuse first ( $3.00 fix ) mine was good so next was to try the board.

Parts Used:

PCB Assembly,Sub

ROBERT from CHIPPEWA FLS, WI
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Thermostat needed to be replaced

We had made this determination with the help of a repairman on the phone. I ordered the part and waited for it. It was stuck in West Virginia. After several days after it was expected a repairman fixed my range to the tune of $168. It should have cost $30 (the cost of the part and shipping).
Unfortunately I probably won't order from PartSelect again.

Parts Used: