Models > REG74HBL2

REG74HBL2 Frigidaire Range - Overview

Sections of the REG74HBL2

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Main Terminal Block Kit – Part Number: 5304409888
Main Terminal Block Kit
★★★★★
★★★★★
(12)
PartSelect #: PS471605
Manufacturer #: 5304409888
Terminal block kits are also known as terminal boards, or terminal strips, and they are found in a wide variety of household appliances. Most often in ranges, wall ovens, and dryers. This kit attaches...
$9.37
  In Stock
Order within the next 1 hr and 25 mins and your part ships today!
Bake Element - Push On Terminals – Part Number: 5308003347
Bake Element - Push On Terminals
★★★★★
★★★★★
(1)
PartSelect #: PS473450
Manufacturer #: 5308003347
$116.91
  Special Order
SPRING-OVEN DOOR – Part Number: 08003264
SPRING-OVEN DOOR
PartSelect #: PS411314
Manufacturer #: 08003264
  No Longer Available
Oven Thermostat – Part Number: 5303934039
Oven Thermostat
PartSelect #: PS470058
Manufacturer #: 5303934039
This part establishes and maintains the internal temperature of the oven cavity.
  No Longer Available
HINGE – Part Number: 5308003183
HINGE
PartSelect #: PS473443
Manufacturer #: 5308003183
$71.87
  Special Order
HEATER – Part Number: 5301310050
HEATER
PartSelect #: PS452888
Manufacturer #: 5301310050
  No Longer Available
DISCONTINUED – Part Number: 3931010
DISCONTINUED
PartSelect #: PS449288
Manufacturer #: 3931010
$192.86
  Special Order
LATCH – Part Number: 5305260201
LATCH
PartSelect #: PS473055
Manufacturer #: 5305260201
  No Longer Available

Questions And Answers for REG74HBL2

Be the first to ask our experts a question about this model!

Common Symptoms of the REG74HBL2

[Viewing 5 of 5]
Little to no heat when baking
Fixed by
these parts
Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing
Show All
Element will not heat
Fixed by
these parts
Fixing
Show All
Oven not heating evenly
Fixed by
these parts
Fixing
Show All
Little to no heat when broiling
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Cord was not tightened enough by delivery crew.
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools needed are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.
Parts Used:
Main Terminal Block Kit
  • Timothy from Spring Valley, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
95 of 148 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The elements were not heating up
It was really easy just unplugged it took off the back cover changed the part out put back cover on plugged it in and the elements were working great!
Parts Used:
Main Terminal Block Kit
  • Tanya from KALISPELL, MT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven wires arced and caused the terminal block to melt and become detached from the back of the range
Removed the wires that I could, then terminal block. Installing the new terminal block was very easy; however the wires that arced were fused to the terminal bock screws and needed to be cut and new connectors had to be put on the wires to allow them to be reattached to the block safely.
Once all was replaced and reinstalled the oven has worked great. The length of the repair was increased because of the melted parts and having to run to the store to get the new wire connectors big enough to fit on the wires. If we were simply replacing the block and had not encountered the melted ends, it would have been a very quick and easy repair.
Parts Used:
Main Terminal Block Kit
  • Daniel from Falmouth, MA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Wrench set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!