RAS240DM2WW General Electric Range - Instructions

Leo from TWIN FALLS, ID
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

22 of 43 people found this instruction helpful.

Was this instruction helpful to you?

Twice I ordered the oven light bulb & each time the light bulb was defected

I had to call for a appointment for repair with GE Appliance because I thought then it . .was something electrical. The technician came out & checked everything out, turned out it was not electrical, The technician went out to his truck got a light bulb from his truck, put it in & it worked. It cost me $121.00 for trip charge from GE appliance for a light bulb that worked, your light bulbs were defective twice. Very disappointed with your products, cost me alot of money for a good light bulb thru GE appliance

Parts Used:

Barbara from BELLEVUE, WA
Difficulty Level:
Very Difficult
Total Repair Time:
Less than 15 mins

17 of 34 people found this instruction helpful.

Was this instruction helpful to you?

I needed new drip pans

I lifted out the burners and took out the old drip pans ans then replaced the burners. However the 8 inch pans were bigger than the old ones and they do not fit properly. They are sitting on top of the stove and not inserted like they should be. I will have to look elsewhere to find ones that fit.

Parts Used:

Carol from Brookfield, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

5 of 5 people found this instruction helpful.

Was this instruction helpful to you?

We had been searching for burner bowls for our GE range (10+ years old) and could not find replacements for them. I found the burner bowls we needed on partselect.com . I was able to easily place the order and the burner bowls were delivered to me the next day.

No repair necessary, but the service was excellent!

Parts Used:

Marlene from Rancho Murieta, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

7 of 11 people found this instruction helpful.

Was this instruction helpful to you?

old one did not fit right

took the old one out and dropped the new one in, replaced the electric burner and done

thw worse part was paying as much for s&h as i did for the part itself

Parts Used:

Pat from PALM BAY, FL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins

4 of 4 people found this instruction helpful.

Was this instruction helpful to you?

replace a drip pan

OK, I put the drip pan under the burner. Without a single problem.

Parts Used:

John from Buffalo, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

lights blown out

replaced lights in refrigirator and freezer

Parts Used:

Gerald from WINTERVILLE, GA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

6 of 14 people found this instruction helpful.

Was this instruction helpful to you?

Needed new burner bowls

No repairs, really-just replacement, but I have been looking for the burners for three and one half years, and PartSelect had exactly what I needed for this old stove!
Theyalso had the electric element that I bought in the next order.

Parts Used:

Barbara from Richmond, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 6 people found this instruction helpful.

Was this instruction helpful to you?

The original drip pans had rusted and needed replacement.

We tried to find the replacement pans at the local hardware store and were disappointed in that although they were cheaper, they were not deep enough to handle the heating elements. We were delighted to find that the parts from PartSelect.Com were genuine GE parts... installed in minutes and were delivered VERY quickly!

Parts Used:

Sandy from Olney, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

the drip bowls were a mess- rusty and beyond cleaning

I removed the old drip pans, cleaned the range top, washed and installed the new drip pans and put the old pans, box and packing materials in the trash. In only 12 minutes my range top looked like new and the mess was picked up. Now, if I could just get the rest of the kitchen looking that good that fast!

Parts Used:

Suzanne from Brigthon, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 6 people found this instruction helpful.

Was this instruction helpful to you?

The light inside the oven had burned out

0. As a safety precaution, unplug the range or hit the relevant fuse breaker before you start. You might also want to grab a flashlight. Definitely do not try to do this while the oven is hot.
1. Pinch the wire over the light bulb cap to remove it. This is inside the oven at the back.
2. Pop off the hemispherical glass cap.
3. Unscrew the old light bulb, and screw the new light bulb in its place.
4. Put the cap back.
5. Secure the cap by putting the wire back in its slots on the cap.

No tools needed, the cap is just held in place with pressure from the wire.

Parts Used:

Catherine from SEATTLE, WA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

3 of 7 people found this instruction helpful.

Was this instruction helpful to you?

old wore out parts

just put in the new part

Parts Used:

Bobby from Trinity, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

the burner trays just needed replaced for an 85 year old senior citizen

Removed burner trays, pulled out heater unit, cleaned up inside of area around all four burners, slipped the burner trays back in and pushed the heater unit back into place.

Parts Used:

Bet from Bothell, WA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

rusted out drip pan

unplugged the element took the old pan out and put the new one in, plugged the element back in.

Parts Used:

Brenda L from Naples, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Burned/scorched corroded drip bowl

No brainer. No tools. Remove burner, lift out old drip bowl, drop in new one, plug in burner, voila! Done. 10 seconds.

Parts Used: