R-1874-T Sharp Microwave - Overview
Sections of the R-1874-T
[Viewing 2 of 2]Keep searches simple, eg. "belt" or "pump".
Microwave cooling fan motor assembly
PartSelect #: PS17012686
Manufacturer #: RMOTEB032MRE0
No Longer Available
(6-11) screw; latch hook and upper oven hinge mtg
PartSelect #: PS16589523
Manufacturer #: LX-CZ0052WRE0
No Longer Available
Mounting Bracket
PartSelect #: PS12688573
Manufacturer #: FANGTA175WRYZ
Wall mounting plate
No Longer Available
Door Frame
PartSelect #: PS12689332
Manufacturer #: GCOVHB031MRF0
Inner door choke frame
No Longer Available
Questions And Answers for R-1874-T
Be the first to ask our experts a question about this model!
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
shuts off after 59 seconds(common problem in this model)
went online detailed instructions it vworked perfectly.it even had part numbers which partselect had in stock and delivered to me in record time.THANK YOU PARTSELECT.
Parts Used:
-
NANCY from OCALA, FL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set
3 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
After 59 sec the microwave would shut off
Spent a lot of time on the internet, to discover that the problem was either the vent door motor or the position switch. Replaced both. Repair shop wanted to look at it for $250 and RV insurance had a $250 deductible. The motor appears to work, it was probably the switch, no way to test either item. The microwave now works as it should, a
... Read more
ll for $42 w/ shipping. Easy enough to repair. Getting it out of RV was more of a problem, but again easy if you understood how. Remove the top mounting screws, bolts, or whatever and then take out the two long diagonal screws from the grease filter areas to the upper rear. They mount into the wall plate that is the size of the back of the microwave. Place a microwave size sturdy cardboard box on stove to hold weight of microwave as it releases from the back plate.
Read less
Parts Used:
-
Daryl from Tucson, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:More than 2 hours
-
Tools:Pliers, Screw drivers
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!