This ceramic microwave fuse is just over an inch in length. It is white in the center, and metal on both ends. This is a 20-amp fuse, and is used to power your microwave. If the touch pad on the micro...
This is a control knob for your microwave. The knob is about 1.5 inches in diameter, is black and silver in color, and is sourced directly from the original manufacturer.
This is the replacement monitor switch for your microwave. It is black in color and measures approximately 1 inch by ¾ of an inch. This switch monitors the door latch position of your microwave and co...
This glass tray support ring, also known as a rotating ring, is specially designed for microwaves. It is a genuine OEM part that is guaranteed to fit just like the original part. The support ring is f...
This part is a replacement screw for your oven. It is made of black metal and is sold individually. This screw is approximately 1/4 inch in diameter and about 1/2 inch in length. It is designed to con...
$12.22
In Stock
Questions And Answers for PT7800SH4SS
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Nandkumar
July 6, 2021
Does this oven have a heating element at the bottom of the oven?
For model number PT7800SH4SS
Hello Nandkumar, Thank you for the question. Yes, this model oven has a bottom Bake Element. It is what we call a Hidden Bake Element and it is under the floor of the oven. We hope this helps!
Hello Bought a house 2 years ago one day microwave is in demo mode a friend we check beaker fuses inside microwave no clue any help will be appreciated
For model number PT7800SH4SS
Hello Renan, thank you for getting in touch. In order to take this model out of demo mode, please follow these simple steps!
1. Turn off the power to the unit for at least 60 seconds, then turn the power back on.
2. Press the START and BACK pads simultaneously for a full 3 seconds. The Demo Mode should clear after about 5 seconds, and "Demo Mode Off" should appear in the display.
3. Then set the clock.
If the problem still persists, we recommend replacing the control board, part number PS12722613. We hope this information is useful!
When you turn on the oven after about one minute, it says cooling fan error press clear so essentially the oven won't stay on
For model number PT7800SH4SS
Hello Robin, thank you for the question. We would recommend checking the cooling fan, part number PS11736333, to fix the issue. We hope this solves your problem!
Turned out the issue was easily solved by replacing a single, inexpensive fuse.
First off, UNPLUG THE MICROWAVE.
The fuse is located under the plastic grill at the top of the microwave. It's held on by two screws. Once you've removed the screws and taken off the plastic grill, you go to the right side of the mic
... Read morerowave and remove another screw that holds a small metal grill in place. Removing the small metal grill is probably the toughest part of this repair. You kind of have to rock it back and forth a bit to get it to release. Once that's off, you can get to the fuse. I removed the burnt out one with a pair of needle nose pliers. I also put a small piece of cardboard under the fuse when I did this so I didn't accidentally drop it into the innards of the microwave. I did the same thing when I replaced the new fuse. I then plugged the appliance back in and made sure it worked. Once that was confirmed, I replaced both grills.
Remove microwave outer cover. Turn on side & locate the upper & lower door switches. Better to replace in pairs even if one is ok. Remove the wire harness to each switch. Then replace switch and re connect the wire harness. Re attach outer cover and test to see if that solved the problem. If so then well done!!