PR7Y21RHP - Overview
Models starting with PR7Y21RHP
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Lawn Mower Wheel Dust Cover
PartSelect #: PS9982436
Manufacturer #: 581840401
The Dust Shield is a 6-3/4 inch, black plastic part, used to prevent dust or debris fouling the wheel or axle. It attaches inside of the wheel around the axle. Installation is rated as "Easy" and will...
$8.55
In Stock
Lawn Mower Handle Bolt
PartSelect #: PS9014802
Manufacturer #: 532191574
This Handle Bolt is sourced directly from the original equipment manufacturer for use in various lawn and garden equipment. It is used to secure the upper and lower handles together and is tightened b...
$8.55
In Stock
Lawn Mower Engine Control Cable
PartSelect #: PS9015022
Manufacturer #: 532183567
This Genuine OEM blade control cable assembly is designed for use with walk-behind and push lawn mowers. Sold individually, it includes a durable metal wire cable with Z-type bent ends, a rubberized p...
$25.41
In Stock
Lawn Mower Blade (21-In)
PartSelect #: PS9286924
Manufacturer #: 532189028
This is a genuine part that is supplied by the original manufacturer for use with Poulan lawn mowers. The blade allows you to cut grass, and weeds safely. This part is made of steel and is sold indivi...
$28.22
In Stock
Lawn Mower Handle Knob
PartSelect #: PS9020379
Manufacturer #: 532185577
This genuine replacement part is sourced directly from original manufacturer. It is used on a variety of lawn mowers. This is the knob that helps to secure the upper handle. It is made out of plastic ...
$11.29
In Stock
Lawn Mower Pinion
PartSelect #: PS9016131
Manufacturer #: 532403849
It is a genuine OEM supplied item which is made for walk-behind lawn mowers. This is a high-quality replacement for a missing or a damaged pinion gear that helps to drive the mower's wheel. Unfortunat...
$8.55
In Stock
Lawn Mower Flangelock Hex Nut
PartSelect #: PS9022497
Manufacturer #: 532409149
Made of high-quality metal, this hex flange locknut is designed for use with various lawn mowers and ride-on mower/tractor models and is sold individually. This locknut attaches to the end of the carr...
$6.40
In Stock
Wheel And Tire Assembly
PartSelect #: PS9015379
Manufacturer #: 532180775
Upgrade your lawn mower with the Husqvarna Wheel & Tire Assembly. This front drive wheel, specially designed for maximum maneuverability and stability, is an essential for both residential and profess...
$42.37
In Stock
Lawn Mower E-Ring
PartSelect #: PS9145393
Manufacturer #: 812000058
The E-Ring 7/16 is a 7/16-inch silver, metal part which can be attached to various locations on a variety of equipment to snap into grooves and secure parts into place. This part will require pliers t...
$6.40
In Stock
Lawn Mower Drive Pawl
PartSelect #: PS9016598
Manufacturer #: 532404845
This part has been sourced from the original manufacturer and is intended to be used with walk-behind lawnmowers from Husqvarna, Poulan, Weed Eater, and Jonsered. The metal pawl is used to secure the ...
$7.04
In Stock
Lawn Mower Blade Adapter
PartSelect #: PS9973659
Manufacturer #: 532418373
This blade adapter is a genuine manufacturer approved replacement part. It is specially made for use with walk-behind push lawn mowers. This adapter secures with the blade and allows it to be connecte...
$16.91
In Stock
Lawn Mower Hardened Washer
PartSelect #: PS9019116
Manufacturer #: 532851074
This washer is not part of a kit or assembly. It is sold individually. With an O.D. of 1 inch, this OEM replacement part is made of dark grey metal and is used to provide a tight seal between the mowe...
$6.40
In Stock
Common Symptoms of models starting with PR7Y21RHP
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Cable was broke.
Pushed the cable through the engine mount.Connected the cable to the engine slider. Pulled cable through the previous tie down connected to the lower end of the bar. Attached the connector on the cable to the hole in the lawn mower bar near the top of the bar.. Attached the top end of the cable to the on/off bar where you push the mower.
Parts Used:
-
James from ASHTABULA, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers
6 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Worn high wheel rear bushings.
Remove 3/8 nut with a 9/16 wrench. Re move wheel from mower the remove old bushing clean. Install new bushings (2 piece bushings). Reinstall the wheel on to the mower.
Parts Used:
-
Dennis from MILWAUKEE, WI
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Wrench set
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front drive wheel locked up, causing the mower to not be able to be pushed.
Removed wheel by pressing off the plastic hub cap exposing the nut holding the wheel. I removed the nut, then pulled the wheel straight off the axel shaft. This exposed the broken dust cover. I they wiggled the dust cover off, cleaned the dirt from inside the wheel, placed the new dust cover, replaced the wheel, nut and hub cap.
Parts Used:
-
Walter from EVERETT, WA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
2 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!