PR675R21MCA Poulan Lawn Mower - Overview
Sections of the PR675R21MCA
[Viewing 2 of 2]
Keep searches simple, eg. "belt" or "pump".
Lawn Mower Wheel Dust Cover
PartSelect #: PS9982436
Manufacturer #: 581840401
The Dust Shield is a 6-3/4 inch, black plastic part, used to prevent dust or debris fouling the wheel or axle. It attaches inside of the wheel around the axle. Installation is rated as "Easy" and will...
$8.98
In Stock
Lawn Mower Handle Bolt
PartSelect #: PS9014802
Manufacturer #: 532191574
This Handle Bolt is sourced directly from the original equipment manufacturer for use in various lawn and garden equipment. It is used to secure the upper and lower handles together and is tightened b...
$8.98
In Stock
Blade
PartSelect #: PS9022471
Manufacturer #: 532406712
Discover the power of a pristine cut with the Husqvarna lawn mower mulching blade, designed exclusively for mowers with a generous 21-inch deck. This manufacturer-approved blade doesn't just cut your ...
$26.35
In Stock
Blade Adapter
PartSelect #: PS9982378
Manufacturer #: 581547901
This is an OEM replacement part for various models of lawn mowers. This part connects the blade to the shaft, is made of metal, is silver, is not part of a kit or assembly, and is sold individually. I...
$26.35
In Stock
Lawn Mower Flangelock Hex Nut
PartSelect #: PS9022497
Manufacturer #: 532409149
Made of high-quality metal, this hex flange locknut is designed for use with various lawn mowers and ride-on mower/tractor models and is sold individually. This locknut attaches to the end of the carr...
$6.72
In Stock
Hex Head Screw 3/8-24x1-3/8 Gr. 8
PartSelect #: PS9026163
Manufacturer #: 532851084
This is a genuine manufacturer-sourced replacement screw which is specially designed for use with Craftsman lawn and garden equipment. It is a standard hardware which has multiple applications dependi...
$6.72
In Stock
Nut Lock
PartSelect #: PS16381792
Manufacturer #: 596040501
This is a Manufacturer Approved replacement nut for lawn and garden equipment. This item is Metal an is Sold Individually. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt.
$6.72
In Stock
Hairpin Cotter
PartSelect #: PS9006491
Manufacturer #: 532051793
This is an authentic manufacturer-sourced replacement component which is specially designed for use with Poulan, Husqvarna and Weed Eater walk-behind lawn mowers. It helps to secure a component on a s...
No Longer Available
Lawn Mower Screw Hinge
PartSelect #: PS9008085
Manufacturer #: 532088652
A genuine item which is supplied directly from the original equipment manufacturer for use with Poulan, Husqvarna and Weed Eater lawn and garden equipment. It is one of the special screws for the skir...
$6.72
In Stock
Discharge Chute
PartSelect #: PS12641106
Manufacturer #: 583702501
This is an original part from Craftsman for use with Craftsman Lawn Mowers. The Mulch Assembly when installed in the grass-discharge chute, converts the mower to mulching mode. The most common reason ...
No Longer Available
Nut
PartSelect #: PS16372474
Manufacturer #: 582478602
This nylon-insert flange nut is designed for use on outdoor power equipment to securely fasten components exposed to vibration and torque. The built-in flange helps distribute load evenly without the ...
$6.72
In Stock
Lawn Mower Wheel Kit
PartSelect #: PS9020860
Manufacturer #: 532193139
This is an authentic Craftsman replacement part, sourced from the original manufacturer for use with walk-behind lawnmowers. The special wheel is a complete part assembly that has a geared hub that is...
$65.73
In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Front drive wheel locked up, causing the mower to not be able to be pushed.
Removed wheel by pressing off the plastic hub cap exposing the nut holding the wheel. I removed the nut, then pulled the wheel straight off the axel shaft. This exposed the broken dust cover. I they wiggled the dust cover off, cleaned the dirt from inside the wheel, placed the new dust cover, replaced the wheel, nut and hub cap.
Parts Used:
-
Walter from EVERETT, WA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
4 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My lawn mower blade wouldn’t stay in place. The old blade adapter had worn down and broken.
I took off the old blade adapter and put the new one on. It literally requires removing one bolt. Unfortunately, once I started and ran my mower for a few minutes it blew up and left a charred patch of lawn. The underside of the mower is mangled metal and unusable now. The repair, though, was super easy!
Parts Used:
-
Joel from ROSEVILLE, MN
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
3 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!