Models > PR65Y22SHP

PR65Y22SHP Poulan Lawn Mower - Overview

Sections of the PR65Y22SHP

[Viewing 2 of 2]
Page A Diagram and Parts List for Poulan Lawn Mower
Page A
Page B Diagram and Parts List for Poulan Lawn Mower
Page B
Keep searches simple, eg. "belt" or "pump".
Blade, 22" – Part Number: 532406713
Blade, 22"
PartSelect #: PS9017810
Manufacturer #: 532406713
This blade is sourced directly from the manufacturer for use in Craftsman and Husqvarna lawn mowers. The blade is the part of the mower that is responsible for cutting and mulching the grass. It is 22...
$15.90
  In Stock
Wheel Adjuster Kit - RF/AWD – Part Number: 581497908
Wheel Adjuster Kit - RF/AWD
★★★★★
★★★★★
(1)
PartSelect #: PS11824351
Manufacturer #: 581497908
This part is used to move the mower deck up or down to the desired lawn mowing height.
$19.88
  In Stock
Cover, Dust, Wheel – Part Number: 581840401
Cover, Dust, Wheel
★★★★★
★★★★★
(3)
PartSelect #: PS9982436
Manufacturer #: 581840401
The Dust Shield is a 6-3/4 inch, black plastic part, used to prevent dust or debris fouling the wheel or axle. It attaches inside of the wheel around the axle. Installation is rated as "Easy" and will...
$4.99
  In Stock
Bolt, Handle – Part Number: 532191574
Bolt, Handle
★★★★★
★★★★★
(1)
PartSelect #: PS9014802
Manufacturer #: 532191574
This Handle Bolt is sourced directly from the original equipment manufacturer for use in various lawn and garden equipment. It is used to secure the upper and lower handles together and is tightened b...
$3.99
  In Stock
Rear Skirt – Part Number: 532413160
Rear Skirt
★★★★★
★★★★★
(1)
PartSelect #: PS9287254
Manufacturer #: 532413160
$13.69
  In Stock
Engine Zone Control Cable – Part Number: 532183567
Engine Zone Control Cable
★★★★★
★★★★★
(2)
PartSelect #: PS9015022
Manufacturer #: 532183567
This zone control cable is for lawn mowers. Zone control cable stops the engine when you let go of the handle.
$14.93
  In Stock
Height Adjuster – Part Number: 581497907
Height Adjuster
PartSelect #: PS11824350
Manufacturer #: 581497907
$17.43
  In Stock
Handle Knob – Part Number: 532185577
Handle Knob
PartSelect #: PS9020379
Manufacturer #: 532185577
$3.99
  In Stock
Pinion – Part Number: 532403849
Pinion
PartSelect #: PS9016131
Manufacturer #: 532403849
$6.21
  In Stock
E-Ring 7/16 – Part Number: 812000058
E-Ring 7/16
PartSelect #: PS9145393
Manufacturer #: 812000058
The E-Ring 7/16 is a 7/16-inch silver, metal part which can be attached to various locations on a variety of equipment to snap into grooves and secure parts into place. This part will require pliers t...
$3.99
  On Order
Hardened Washer – Part Number: 532851074
Hardened Washer
PartSelect #: PS9019116
Manufacturer #: 532851074
This washer is not part of a kit or assembly. It is sold individually. With an O.D. of 1 inch, this OEM replacement part is made of dark grey metal and is used to provide a tight seal between the mowe...
$4.99
  In Stock
Drive Control Cable – Part Number: 532194653
Drive Control Cable
★★★★★
★★★★★
(1)
PartSelect #: PS9016384
Manufacturer #: 532194653
$27.40
  In Stock
View More
Back to Top

Questions And Answers for PR65Y22SHP

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Back to Top

Common Symptoms of the PR65Y22SHP

[Viewing 1 of 1]
Mower blade does not cut
Fixed by
these parts
Fixing
Show All
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Cable was broke.
Pushed the cable through the engine mount.Connected the cable to the engine slider. Pulled cable through the previous tie down connected to the lower end of the bar. Attached the connector on the cable to the hole in the lawn mower bar near the top of the bar.. Attached the top end of the cable to the on/off bar where you push the mower.
Parts Used:
Engine Zone Control Cable
  • James from ASHTABULA, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drive cable broken
Remove the front drive cover and disconnect the old from the drive, hook the new drive cable to the drive, and connect new cable back to the handle. Reinstalled the drive cover, started unit, and test that the drive was working correctly.
Parts Used:
Drive Control Cable
  • Frank from AUSTIN, TX
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top