This OEM ice and water filter fits side-by-side and bottom-freezer GE models. The most common reason you would need to change this part is if you have never updated your model and it is no longer filt...
$73.07
In Stock
Order within the next 10 hrs and your part ships today!
The French door divider spring fits most Samsung French door style refrigerators. The spring applies tension between components in the refrigerator, which engages and retracts the door flap. This will...
$13.24
In Stock
Order within the next 10 hrs and your part ships today!
This is a replacement spring pin for French door-style refrigerators. This part is made of white plastic and is approximately ½ an inch in length. If the mullion that keeps the doors closed is not wor...
This is the replacement pantry flip lid cover for your refrigerator. It is made of clear and white plastic and is approximately 30 inches in width and 6 inches in length. The pantry flip lid cover is ...
$132.44
In Stock
Order within the next 10 hrs and your part ships today!
This part is the replacement French door hinge for your refrigerator. It is made of white plastic and is approximately 1 ¼ inch by 1 inch. The French door hinge can also be known as the flipper hinge....
This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.
$299.71
In Stock
Order within the next 10 hrs and your part ships today!
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tim
March 4, 2020
Water leaking onto the floor from under the unit near the freezer drawer.
For model number PFSF6PKWBWW
Hello and thank you for writing.
It certainly sounds like it could be a faulty or loose water filter PS8746144 and/or possibly a malfunctioning water valve PS2338130 you should check the part(s) for signs of damage and replace the part(s) as needed. We hope this helps. Please contact us anytime if you require further assistance.
The water dispenser will only deliver a trickle, a loud rapping noise starts and the water stops. I have replaced part #WR57X10050 which has not made any difference. A brand new water filter was installed just after the problem started which eliminates the filter as the source of the problem. I appreciate any appropriate suggestion that I can potentially use to fix this DIY. Thank you
For model number PFSF6PKWBWW
Hi Brian,
Thank you for your question. If you are hearing a loud noise, there may be air in the lines that will need to be purged. Also, if you have recently replaced the water filter in your refrigerator, make sure that you flush it before you use it. We hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Unscrew old filter and remove(counterclockwise). Line up arrow on new filter with arrow on connection housing. Turn clockwise till resistance met. Do not overtighten. Follow directions. Simple.
First, I have to say I live in the next state over, and I recieved the parts the next day. Yeah! OK, I removed the adjacent drawers *and the removable lower storage shelves on the doors for clearance*. Taking out the broken lid is easy. The new one is a tight fit. The right side has a raised pad on the pivot point, but the left one d
... Read moreoes not. I worked the peg (pivot point) in on the right side and slowly and carefully pushed the stationary plastic left side in slightly(and sprung the lid slightly) to get enough clearance to get in the left peg without breaking the new lid pivot. While doing this, one has to make sure the shelf immediately behind the lid is in place since there are support tabs located on it, and you will have to rework the thing if you don't get them to mate on the installation.