EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
Back
Back
Back
Keep typing for more specific results...
Keep typing for more specific results...
Models > PDT750SSF8SS > Symptoms > Leaking

Parts That Fix General Electric Dishwasher PDT750SSF8SS Leaking

Leaking is a commonly reported symptom for the PDT750SSF8SS General Electric Dishwasher, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your PDT750SSF8SS General Electric Dishwasher that will fix Leaking. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
Leaking is a commonly reported symptom for the PDT750SSF8SS General Electric Dishwasher, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your PDT750SSF8SS General Electric Dishwasher that will fix Leaking. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
Fixes Symptom 42% of time

Stop leaks and keep your dishwasher running smoothly with this tub gasket replacement. It forms a tight seal between the door and tub, so water stays inside during every wash cycle. Made from strong, flexible rubber, it’s built to last and easy to install—just remove the old gasket, clean the channel, and press the new one in. If you’ve noticed puddles on the floor or dishes that aren’t drying well, this simple fix can make a big difference.

$ 28.76
  Special Order
PartSelect Number PS11721490
Manufacturer Part Number WD08X22095

Replacing your General Electric Dishwasher GASKET TUB Stainless Steel

Replacing your GASKET TUB Stainless Steel

Customer Repair Stories

Water leaking from bottom of Dishwasher
Replaced old gasket with new one. More difficult than expected, because new gasket was much stiffer than old one. Also, the yellow centering spot on gasket (to line up with top latch) was nearly impossible to see. Unfortunately, this did not solve the problem for me, so money was wasted. Bought new dishwasher.
  • G from GLEN COVE, NY
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
8 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher leaking from the bottom of the door.
Process of elimination and a visit to my local repair store told me it was wise to try the tub gasket, and according to partselect.com, it solved the problem a majority of the time. My local repair dealer agreed: Try it. They agreed because for them to replace a lower door gasket AND the $10 tub gasket... if they came out, the service call and parts would equal half the cost to replace the whole dishwasher. So I bought a tub gasket from partselect.com and replaced the old one. It worked, it was easy, so if your same make & model is leaking? Try it first. That's my advice.
  • Marty from TRAVERSE CITY, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
12 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fixes Symptom 16% of time

$ 15.70
  In Stock
PartSelect Number PS8769905
Manufacturer Part Number WD24X20586
Fixes Symptom 10% of time

Enhance the functionality of your dishwasher with this Door Vent Seal from renowned brand GE. This product ensures a reliable barrier to prevent leaking between the door vent and the dishwasher's inner liner, maintaining the longevity and efficiency of your appliance. Even though installation is simple, it's advised to unplug the dishwasher before you begin and don't forget to wear work gloves to protect your hands while doing so. Enhance the lifespan of your dishwasher with this pertinent component today. With GE, you can trust in the quality and durability of your purchase.

$ 38.55
  In Stock
PartSelect Number PS8688151
Manufacturer Part Number WD08X10092

Replacing your General Electric Dishwasher DOOR VENT SEAL

Replacing your DOOR VENT SEAL
Fixes Symptom 8% of time

Enhance the efficiency of your GE dishwasher with this high loop drain hose. Perfect for channeling the drain water effortlessly from the dishwasher to the drainage, this appliance part simplifies the everyday task of dishwashing. Remember to shut off your water supply and unplug the unit before you embark on installation. Supplies with clear instructions to guide you on the successful installation of the high loop drain hose. Don't forget your work gloves - wearing them will safeguard your hands throughout this process. With this GE high loop drain hose, expect a hassle-free and smooth running dishwasher.

$ 29.83
  In Stock
PartSelect Number PS16618969
Manufacturer Part Number WD24X29378

Customer Repair Stories

I had a hole in the drain line of my dishwasher.
It was relatively easy to fix. I unscrewed the mounting screws from the cabinet, slide the dishwasher out to access the pump under the dishwasher, I did raise the dishwasher on the left side and steadied with a stool to make access to the pump fitting easier. Then I loosed both clamps at the ends of the hose ie. from the dishwasher pump and the connection to the sink drain line, pulled the clamp off of the end that connects to the pump and placed it on the new hose connection, I removed the old hose, connected the new one and tightened the drain line connections. I placed the hose in the hose holders on the side of the dishwasher slid the dishwasher back into place and secured it in place with the mounting screws.
  • Tina from SOUTH WEST CY, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fixes Symptom 6% of time

$ 29.72
  In Stock
PartSelect Number PS12743288
Manufacturer Part Number WD49X25081
Fixes Symptom 5% of time

Need to fix your refrigerator's icemaker? We have just the part for you, the Whirlpool water inlet tube. This original and genuine replacement part is key to getting your refrigerator's icemaker and water dispenser up and running again. When working properly, it delivers water smoothly to these elements, so you'll be back to enjoying crisp ice cubes and fresh, cold water in no time. It's important that you check your fridge's model number before purchasing, as every model has slight differences. This particular part is designed for compatibility with certain Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef fridges. Get ready to install! Don't forget to dissipate any risks?remove perishable items, turn off the power and water supply to the fridge before you start. And, of course, wearing protective gloves is always good practice. This isn't just about buying a part, it's about restoring your refrigerator back to its optimal operation. We're here to support you and make this process as simple as possible, so let's get your fridge back to working like new.

$ 40.76
  In Stock
PartSelect Number PS11766955
Manufacturer Part Number WD08X22758
Fixes Symptom 3% of time

This water inlet valve assembly is a critical component that regulates water flow into the dishwasher, ensuring proper filling for an effective wash cycle while preventing leaks. Replacing a faulty valve can resolve issues such as inconsistent water levels, leaks, or incomplete cycles. Built for durability and reliability, this part helps maintain optimal cleaning performance. Installation is DIY-friendly—always shut off water and power before removing the old valve and connecting the new one according to your appliance’s instructions.

$ 49.83
  In Stock
PartSelect Number PS11762952
Manufacturer Part Number WD15X22948

Customer Repair Stories

Dishwasher was not spraying water
Water valve replacement was easy. Turned off water supply valve. Unscrewed water supply from valve on dishwasher, removed 2 water hoses , that feed top and bottom sprayer’s And reinstalled everything opposite of removal. 5min job
  • Jesse from PYLESVILLE, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Wrench (Adjustable)
6 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fixes Symptom 3% of time

Revitalize your GE appliance with this high-quality Tub Trims Kit. This kit is manufactured by GE, ensuring it's designed with your appliance's specifications in mind for the perfect fit and functionality. The Tub Trims Kit is essential in maintaining the overall condition and performance of your appliance, aiding in ensuring a longer lifespan and efficient functioning. This durable kit is easy to install and designed for the rigors of daily use. Enhance your appliance's performance today with this excellent GE Tub Trims Kit. Your GE appliance deserves nothing less than the best.

$ 28.56
  In Stock
PartSelect Number PS16742696
Manufacturer Part Number WD01X31618
Fixes Symptom 2% of time

Upgrade the efficiency of your dishwasher with the GE Drain Hose Assembly. This essential component facilitates the flow of drain water from the appliance to the main drain, ensuring your machine functions optimally. Remember to disconnect your dishwasher from its power source and shut off its water supply before commencing this repair. Follow the installation guide scrupulously for a successful replacement and to ensure the longevity of your appliance. Protect your hands with work gloves during the procedure. Conclusively, this Drain Hose Assembly exemplifies the trusted quality synonymous with GE products.

$ 30.93
  In Stock
PartSelect Number PS6011670
Manufacturer Part Number WD24X10062

Replacing your General Electric Dishwasher DRAIN TUBE Assembly

Replacing your DRAIN TUBE Assembly
Fixes Symptom 2% of time

This is a flood switch assembly for your washer. The flood switch controls the hot and cold water filling your washer tub to ensure the proper amount of water. You may need to replace this part if your washer is overfilling or underfilling with water. It is about 5.5 inches in length, and mostly black in color with a green tip.

$ 51.45
  In Stock
PartSelect Number PS8690623
Manufacturer Part Number WD21X10519

Replacing your General Electric Dishwasher Flood Switch

Replacing your Flood Switch

Customer Repair Stories

Heating Element Wasn't Turning On So Dishes Weren't Drying
Ran the diagnostic code test and no alarms turned on. Ran the heater test and it didn't turn on. I figured it was either the flood switch or the heating element itself. Removed and cleaned the flood switch and still nothing. Replaced the old flood switch and now it works like a charm. It took a minute to run tests and figure out a plan of action, but after ordering and receiving the part it was a quick operation to replace the old flood switch. Kill the power. Remove lower basket. Remove lower arm. Remove the coarse filter and the fine filter. Dry up water in bottom of dishwasher. Use 1/4" nut driver to remove two screws holding flood switch in place. Unplug old switch. Plug in new one. And put everything back. Saved a few bucks for sure. If I can do it, you can do it!
  • Cheyne from RIVERSIDE, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
22 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No water flowing into dishwasher
We tried cleaning out the filter and it clogged with a huge amount of gunk. We removed the gunk, scrubbed the filter, and tried running the dishwasher, but still no water. That took over an hour (not counting the time the dishwasher spent running). Then we tried your diagnosis center and it pointed to the flood switch or the water valve. I extracted the flood switch (another 30-60 minutes) to check it, and it also contained gunk and (significantly) did not rattle, which made me suspect the flood switch was the problem, so I ordered one. Once the replacement arrived, I checked it and the flood switch rattled, confirming that it should work properly. I spent 30-45 minutes installing it, plus the filter assembly and racks I had to remove to access it. Ran the dishwasher and everything came out sparkling clean. I don't know where the gunk came from, but if you aren't getting water and the filter is full of gunk, check the flood switch.
  • Jeff from AUBURNDALE, MA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
38 of 46 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fixes Symptom 2% of time

Introducing the GE KIT - Piranha Clamps, designed exclusively for GE dishwashers. These clamps maintain a secure connection and prevent leakage by holding the end of the water hose firmly in place. Before installing this vital part, do ensure that you have unplugged the dishwasher and turned off the water supply. Wearing work gloves during this repair operation is recommended to safeguard your hands. This kit also includes the special Dishwasher Sump Clamp for enhanced reliability and durability. Trust GE for consistent quality and unparalleled performance in home appliance repair parts.

$ 80.73
  In Stock
PartSelect Number PS6011682
Manufacturer Part Number WD35X10382