PB-760LNH Echo Leaf Blower / Vacuum - Overview
Models starting with PB-760LNH
Click on the best match to narrow your results.
- PB-760LNH (P37812001001 - P37812999999) Echo Leaf Blower / Vacuum (Backpack Blower)
- PB-760LNH (P39313001001 - P39313999999) Echo Leaf Blower / Vacuum (Backpack Blower)
- PB-760LNH (P39511001001 - P39511999999) Echo Leaf Blower / Vacuum (Backpack Blower)
- PB-760LNH (P43314001001-P43314999999) Echo Leaf Blower / Vacuum (Backpack Blower)
Keep searches simple, eg. "belt" or "pump".
Leaf Blower Fuel Tank Vent
PartSelect #: PS9183121
Manufacturer #: A356000031
This a a genuine OEM replacement check valve for your small engine. It is also known as a fuel tank vent. You may need to replace this part if you are noticing debris or dirty oil in the reservoir. Ma...
$10.97
In Stock
Purge Bulb
PartSelect #: PS8857246
Manufacturer #: 12318139130
This OEM replacement part is used to pump fuel from the tank to the carburetor in order to start the engine. It may also be referred to as a Primer Bulb. It is made of durable black plastic and is sol...
$9.80
In Stock
Trimmer Washer
PartSelect #: PS9066494
Manufacturer #: 69911804560
This flat washer is a black, metal, individually sold part. If the part becomes damaged due to fatigue it may appear mishapen, and should be replaced.
Refer to your owners manual or check your model...
$6.40
In Stock
Fuel Filter Assy.
PartSelect #: PS16478678
Manufacturer #: A369000460
The Fuel Filter is a white and silver, individually sold, steel part. It reuires pliers to install and its installation is rated as Easy.
The part attaches inside of the fuel tank and is used to cle...
$11.70
In Stock
Fuel Filter
PartSelect #: PS11836543
Manufacturer #: A369000440
This OEM Fuel Filter is a white and silver, steel part, sold individually. It requires a pair of pliers to install and is ranked as Easy to repair by our customers. This part attaches inside of the fu...
$9.83
In Stock
Fuel Line Clip
PartSelect #: PS10053748
Manufacturer #: V490001230
Used in over 150 models of outdoor power equipment, this clip is commonly used to clip fuel lines or other hoses/tubes in place. It is sold individually, not as part of a kit or assembly, made of meta...
$6.40
In Stock
Trimmer Spark Plug Coil
PartSelect #: PS9263507
Manufacturer #: 15901103432
This spark plug wire, also known as a spark plug coil or spark plug cap coil, is compatible with various makes and models of hand-held outdoor power equipment and is sold individually. This wire is in...
$6.40
In Stock
Clip
PartSelect #: PS9246360
Manufacturer #: V491000120
This is an Authentic Manufacturer Sourced replacement part designed for use with a variety of Backpack Blowers. This part is made out of Plastic and it is Sold Individually. This item helps to secure ...
$6.40
In Stock
Spark Plug Cap
PartSelect #: PS8872647
Manufacturer #: 15901203433
This spark plug boot is an authentic OEM supplied replacement part, not an aftermarket equivalent. This rubber cap helps is used to connect the spark plug to the armature-magneto. Over time rubber mat...
$9.81
In Stock
Trimmer Vent Cover
PartSelect #: PS8863837
Manufacturer #: 13132840630
Genuine OEM replacement part, this item is sold individually. The Vent Cover is installed on the vent tube on the carburetors for the outdoor products listed below. After the Vent Hood is installed on...
$8.60
In Stock
Screw 5x16-tapping
PartSelect #: PS9238341
Manufacturer #: V805000000
This replacement screw is a high quality hardware which has multiple applications based on your equipment, please refer to appropriate diagrams for proper location and use of this item. It is a high q...
$6.40
In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Replace clogged fuel filter.
Thru fuel cap, insert copper wire with hook formed on end. Fish around until you grab the fuel line. Pull the fuel line and filter thru the fuel fill neck.
Pull off old filter and replace with new. Push back into fuel tank & be done.
Pull off old filter and replace with new. Push back into fuel tank & be done.
Parts Used:
-
Keith from NORWOOD, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
24 of 42 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bulb was worn out and broken open
The unit is a press fit. To remove the old one required breaking the plastic compression tabs that hold it in place. That was simple enough. Replacing requires lining up in the correct position to meet the inner hose. Then push it in. The compression tabs on the replacement click in and hold.in place.
Parts Used:
-
Richard from SPRING HILL, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
13 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!