NT19K9A (9A01B) Admiral Refrigerator - Overview
Sections of the NT19K9A
[Viewing 5 of 5]Keep searches simple, eg. "belt" or "pump".
Door Shelf Trim Retainer
PartSelect #: PS11743360
Manufacturer #: WP65245-1
This door shelf trim retainer is just over one inch long. It is all white in color and it is made entirely of plastic.
$10.70
In Stock
Food Door Gasket (measures 30-3/4" by 39')
PartSelect #: PS11743835
Manufacturer #: WP70048-3
This white fresh food door gasket measures approximately 30-3/4 inches by 39 inches. It is used on many fresh food doors of top mount model refrigerators that have been manufactured since 1980.
$165.54
On Order
Refrigerator Screw
PartSelect #: PS11740623
Manufacturer #: WP3-24838-048
Sold individually.
$7.47
Special Order
Hinge Pin Bushing
PartSelect #: PS2064817
Manufacturer #: 66036-1
This bushing is used with a 1/4-inch pin. This part is found in refrigerators (and sometimes freezers). The bushing provides a bearing surface for the hinge pin that rotates. Every time you are openin...
No Longer Available
Egg Tray
PartSelect #: PS11743588
Manufacturer #: WP67004411
This egg tray holds fourteen eggs.
$9.62
Special Order
Door Shelf Retainer Bar - Cut to Fit
PartSelect #: PS11743151
Manufacturer #: WP61003045
This cut-to-fit refrigerator door shelf retainer bar comes at twenty-seven inches long. It is made entirely of metal.
$93.14
Special Order
Washer
PartSelect #: PS11742796
Manufacturer #: WP52185-1
This door hinge washer is less than an inch in diameter. It is all white in color and it is made entirely of plastic.
$11.77
Special Order
BUSHING- L
PartSelect #: PS2064814
Manufacturer #: 66034-1
The bushing is made of white plastic and is for a 3/8-inch pin. This bushing is part of your refrigerator assembly and is found on the top of the door. A worn-out bushing will cause your door to becom...
$24.67
Special Order
Lower Hinge Pin
PartSelect #: PS2049401
Manufacturer #: 53672-1
This lower hinge pin is almost an inch long. It is made of metal.
No Longer Available
Questions And Answers for NT19K9A
Be the first to ask our experts a question about this model!
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Common Symptoms of the NT19K9A
[Viewing 1 of 1]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Gasket wouldn't seal all the way around
Due to some deformity of the gasket, it didn't seal all the way around. The instructions suggested using a heat light to warm the gasket with the door open. That didn't work too well so I closed the door and used a heat gun lightly in the areas it didn't seal. That worked great to soften the gasket so the magnet in the gasket could pull
... Read more
it gasket tight to the refrigerator. I let it cool with the door closed and it now seals perfectly.
Read less
Parts Used:
-
Thomas from Mobile, AL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver
6 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door sagging (bushings gone), seal bad
r#1 removed upper hinge bracket, removed icebox door, unscrewed middle hinge bracket, removed main door, extracted broken plastic bushings, pushed in new bushings, reversed process while adjusting doors. works fine now.
#2 compared door seal with new one from partselect. Turned out that new seal is not magnetic. Had to return. ... Read more Door still has bad seal.
#2 compared door seal with new one from partselect. Turned out that new seal is not magnetic. Had to return. ... Read more Door still has bad seal.
Read less
Parts Used:
-
Kenneth from Marble Falls, TX
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
7 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Needed To Replace Gasket/Seal On Fridge
Most importantly make sure you get the wrinkles out of the gasket, a step we did not follow exactly, so we ended up having to work the seal a lot more to make it fit properly which of course made the repair take longer than needed. Other than that no problems here
Parts Used:
-
Nancy from Malden, MA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Pliers, Screw drivers
5 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!