Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
Model has been saved to My Models. If you're not signed in, your lists are available on this device and will expire within 30 days.
Model has been saved to My Models.
Turn off circuit breaker to cooktop. Disconnect wires at junction box under the unit, making note of the color matching. Gently remove cooktop from cutout and flip over, glass down, on a flat, soft, padded surface to protect the glass (I used placemats). Remove the Philips screws around the perimeter of the sheet metal ass
... Read moreembly enclosure box. Lift the box straight up, revealing the inner assembly. Look for the long, narrow PCBA (printed circuit board assembly) that is behind the touch controls. Disconnect the snap-on electrical connector from the PCBA. Gently nudge the small plastic clips at the edge of the PCBA to release it from its seating. Install the new board in its place -- it should just snap into place. Reconnect the electrical connector to the board, making sure it is properly aligned. Replace the metal assembly cover and secure with the original screws. Gently flip the cooktop over and lower straight down into the counter cutout. Reattach the power wiring at the junction box and cover it with the j-box plate. Turn on the circuit breaker. Done!
