Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
Model has been saved to My Models. If you're not signed in, your lists are available on this device and will expire within 30 days.
Model has been saved to My Models.
This drain pump for your washer is designed to remove the dirty water during and after the washing cycle. If your washer has water left in it after its washing cycle is over, or if your washer is expe...
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This ...
The front facing foot is sold individually. It is used on your washing machine and can also be known as an adjustable leveling leg. This specific front facing leveling leg has a rubber foot. It is imp...
This is a door hinge, which allows for your washer door to properly shut during the washing cycle, and open after it is finished. If your door hinge is bent or broken and not allowing the door to shut...
This is a door bellow, also known as a door seal gasket, made for various models of washing machine. This bellow is designed to seal the inner drum of the washer from the outside of the washing machin...
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
This washer dispenser drawer assembly holds detergent, fabric softener, and bleach, dispensing them during the wash cycle to optimize cleaning performance. Compatible with select Whirlpool, KitchenAid...
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...
This washing machine cleaner includes three time-release tablets designed to remove odor-causing residues, grime, and buildup from high-efficiency and top-load washing machines. The tablets work by cl...
This is a dryer door hinge cap, also known as a bushing, which is a durable plastic cap that is installed on the door hinge and is used to allow your dryer door to operate smoothly when opening and cl...
This part is located behind the control panel. It helps determine the level of water in the washer. As the water fills the hose, while tub is filling, it will push the air against a diaphragm inside t...
The leveling leg locking nut is an OEM replacement fastener for use in dryers and washers. It has a head diameter of 3/8 inches and a thread pitch of 16 threads per inch. The nut secures the leveling ...
$7.47
In Stock
Order now and your part arrives by Apr 23
Questions And Answers for NFW5800DW0
Ask our experts a question about this model and we'll get back to you as soon as possible!
6 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Billi
December 7, 2019
My washmachine makes a noise when plugged in but the lights will not come on, cannot push any buttons and the door is locked. What could the problem be?
For model number NFW5800DW0
Hello Billi and thanks for writing.
It sounds like a faulty door lock PS11754810 check and replace if needed. We hope this helps. Please contact us anytime.
Washer is leaking/trickling out the front from glass door onto floor. What parts do we need to repair this?
For model number NFW5800DW0
Hello Robin, Thank you for your inquiry. If water is leaking out of the front of the machine, you may have a problem with the door boot seal/bellow. Check the clamp to make sure it has not come loose or damaged, and check the rubber seal for any damage. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Machine attempts to start door lock clicks , Door locked indicator lights up …machine pauses ,no water in ..and then shuts down
For model number NFW5800DW0
Hi Pete,
Thank you for your question. If the washer will not fill with water, first make sure that the hot and cold water faucets are completely opened. If they are, inspect the water inlet valve. Before inspecting any part in your washer unplug it from the electrical outlet. First visually inspect the water lines and the water inlet valve for signs of leaking, cracks, damage, or wear. If there is no visible damage, check the water inlet valve for continuity with a multimeter on the Rx1 setting. You should receive a reading between 200 and 500 ohms. If you receive any other reading, you will need a replacement water inlet valve. If the valve is fine, inspect the water level switch. Inspect the switch for any signs of wear, burning, cracking, or damage. If it shows any of these of these signs, you will need to replace it. We hope this helps!
Last 2 loads didn't actually dry and spin properly had to do a separate drain and spin cycle.
Now the door is locking it's acting like it wants work but then just doesn't do anything.
Where would I start?
For model number NFW5800DW0
Hi Kyle, thank you for reaching out. Based on the description that you have provided, we would recommend checking the following parts: door lock assembly, part number PS11754810, water level switch, part number PS11754877, and drain pump, part number PS11756700. We hope this sorts out your problem!
Hi the washer started leaking underneath after wash . Wiped up the floor and still leaking underneath the machine a small puddle so far.
What part would I need to repair this?
For model number NFW5800DW0
Hello Dee, thank you for the question. Based on the description that you have provided, we would recommend to replace the drain pump, part number PS11756700. Before replacing this part, we suggest that you should check the drain hose. The hoses can become blocked, kinked, damaged or disconnected, resulting in a leak. We hope this sorts out your problem!
First some background. The door locked up the first time when appliance was less than one year old. The "Maytag Repairman" finally succeeded in getting the door open after propping up the front of the machine and fumbling around underneath for a period of time and then assured me the problem was solved. The problem recurred less than a
... Read more year later, and I called another repairman who seemed to have an easier time of it, and charged $293.42 to replace the water level switch. About six months later the same problem recurred and I took the cover off the top of the machine and found there a booklet "For Service Technician's Use Only". VERY HELPFUL. Told how extremely easy it was to unlock door - took about five seconds. Replacing the switch itself involved pulling one tubing off and disconnecting one elec connection from old switch and replacing on new switch. Total cost $50 plus a few dollars for shipping.
Turned washer on its side. Pulled the bottom plate off. Then unplugged the electrical lines. Then unbolted the drain pump and bolted the new drain pump in. Then reversed the process.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
