NE58F9500SS (AA-01) Samsung Range - Overview
Sections of the NE58F9500SS
[Viewing 5 of 5]Keep searches simple, eg. "belt" or "pump".
Leveling Leg
PartSelect #: PS4240934
Manufacturer #: DG61-00525A
The Black Leveling Leg from Samsung is a durable, genuine part designed for use with many Samsung kitchen appliances. This quality leg-leveling device offers an easy-to-use design to correct uneven su...
$37.91
In Stock
Thermostat
PartSelect #: PS4226434
Manufacturer #: DE47-20037A
This is a high limit thermostat designed for microwaves, ranges and ovens. Made of plastic and metal, this thermostat is designed to open the electrical circuit for your appliance when it reaches a sp...
$30.53
In Stock
Range Convection Fan Motor Assembly
PartSelect #: PS11720787
Manufacturer #: DG96-00110E
The convection fan motor spins the fan blade to circulate hot air through the oven for even heating.
$159.46
In Stock
Rubber Cushion
PartSelect #: PS4241222
Manufacturer #: DG73-00003A
This rubber cushion is supplied by the original manufacturer and has a shaft approximately 1 inch long. The cushion acts as a layer of protection between the oven door and oven frame/cavity. It preven...
$7.47
In Stock
Burner Switch
PartSelect #: PS8764900
Manufacturer #: DG44-01006A
This energy regulator, more commonly known as a surface element control switch or burner switch is compatible with various models of Samsung ranges. It consists of the switch housing and a metal shaft...
$171.50
In Stock
Range Main Glass Cooktop Assembly
PartSelect #: PS8764986
Manufacturer #: DG94-00889B
This cooktop and frame assembly is a genuine OEM replacement part supplied by Samsung. It is specially made to fit with Samsung gas ranges. It includes a black frame made of stainless steel and a blac...
$368.49
In Stock
HEATER RADIANT-DUAL;AC240V,9 Inch/12 Inch,1900W
PartSelect #: PS11729066
Manufacturer #: DG47-00064A
This dual radiant surface element is designed for use in electric ranges and cooktops with smooth-top surfaces. Constructed from durable materials, it delivers consistent and even heat distribution fo...
$239.55
In Stock
Oven Temperature Sensor
PartSelect #: PS4240744
Manufacturer #: DG32-00004C
The temperature sensor, also referred to as a thermostat, probe, or thermistor sensor, is responsible for measuring the temperature inside your oven. It is a platinum-resistance sensor with a resistan...
$144.87
In Stock
Convection Reverse Fan Motor - 120V 60Hz
PartSelect #: PS4241514
Manufacturer #: DG96-00110B
The Samsung Convection Reverse Fan Motor is an exceptional component perfect for your range ovens. Known for its high-quality construction and durability, this product features a unique reverse functi...
$149.94
In Stock
Lower Fan Blade
PartSelect #: PS4241125
Manufacturer #: DG67-00011B
This convection fan blade (part number DG67-00011B) is for ranges. Convection fan blade DG67-00011B spins on the motor shaft to circulate hot air through the oven for even heating. Unplug the range or...
$26.82
In Stock
Questions And Answers for NE58F9500SS
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the NE58F9500SS
[Viewing 4 of 4]Oven not heating evenly
Fixed by
these parts
these parts
Show All
Element will not heat
Fixed by
these parts
these parts
Show All
Door won’t open after self cleaning cycle
Fixed by
these parts
these parts
Show All
Little to no heat when baking
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Oven shut off during self clean cycle and door stayed locked.
I took off the back cover after I looked at youtube similar problems. Then removed the little thermostat and un hooked the 2 wires. I looked up the part and after is was delivered couple days later I connected the 2 wies and after putting the back cover on the oven was back to normal. Was such an easy repair and the part was only $11.
Parts Used:
-
Uwe from FORT COLLINS, CO
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
22 of 46 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Slider Assembly in Oven Warming Drawer
Install handled by building engineer...thankfully. Did not take long for him, however, to install both sides of the drawer.
Parts Used:
-
Judith from WASHINGTON, DC
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Samsung oven was not heating properly. The oven baked at a lower heat (as much as 30 degrees) in the lower ranges of 350 to 450 degrees.
I had previously replaced the heating element and heat sensor to the range. The cost of replacing the thermostat was minimal. The key to replacing the thermostat is finding where it is located. Several videos describing the Samsung thermostat showed it housed under the top of the stove. This particular model places the thermostat at t
... Read more
he back of the range near the left side. After unplugging the range, and removing the back cover with a Phillips screwdriver, it was easy to locate the thermostat. After unplugging the existing one, and using a very small flathead screwdriver to gently pry the upper and lower clips holding it in place, installation of the new thermostat was a breeze. Removing and replacing did not take more than a couple of minutes. The oven is now heating properly at all temperature settings. I would recommend finding a schematic of the range showing the location of all the parts before beginning the repair.
Read less
Parts Used:
-
Les from Tallahassee, FL
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!