Quick Question!

Have you ever purchased from PartSelect.com before?

Models > MDB8751BWB

MDB8751BWB Maytag Dishwasher - Overview

Get Parts and Repair Help for MDB8751BWB

If you know the dishwasher repair part you need, you can browse the list of all parts on the MDB8751BWB, or you can search by name or part description. You can also find your part by where it is located on the MDB8751BWB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for MDB8751BWB parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$30.68

Door Handle and Latch Assembly with Switches

This is a part found in your dishwasher. This part includes the black handle, latch, and 2 switches. This part is a simple on/off mechanism that prohibits the dishwasher from opera...

Order within the next 8 hrs and your part ships today!
$10.23

Silverware Basket - Gray

This silverware basket is gray in color and measures 8 inches wide by 11-1/2 inches high by 12 inches deep. The silverware basket is used to hold small utensils such as forks, spoons, and knives during dishwashing. The manufacturer has redesigned this part to be a complete, full basket with a handle and covers. The basket comes apart into two pieces if you prefer to place them along the sides of your dishwasher instead of the front section of your bottom dish rack. To prolong the life, try not to jam your utensils into place, also try to place them into the holders carefully instead of dropping them in.

Order within the next 8 hrs and your part ships today!
$6.67

Lower Wheel Assembly

The lower wheel assembly in your dishwasher allows the lower dish rack to roll in and out effectively. If you notice that one of the dish rack wheels is damaged or missing, this is...

Order within the next 8 hrs and your part ships today!
$30.29

Door Latch with Switches - NO Handle

This door latch, used in dishwashers, is located at the top of the door and locks the door shut when the dishwasher is working. If the door will not close or is damaged, changing the latch could be the solution. For this repair, remove all screws from the inner panel, then lift up the inner door panel and hold the door apart. Next, access the latch and pull wires from the switches. Refer to the manual provided by the manufacturer for further instructions and guidance. Remember to unplug the dishwasher from the power source or shut off the house circuit breaker before beginning this installation project.

Order within the next 8 hrs and your part ships today!
$19.42

Docking Station with Flappers

If you notice that your dishwasher is leaking, or is not cleaning dishes properly, you may need to replace the docking station. The docking station is located on the water supply t...

Order within the next 8 hrs and your part ships today!
$2.96

Hose Clamp

This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This clamp is used to securely attach a hose to another part of your appliance, which helps prevent leaks from those connections. Depending on the appliance, it can attach hoses to drain pumps, water inlet valves, pressure switches, and injector nozzles. We recommend you refer to model-specific diagrams for appropriate uses and exact placement. This hose clamp is made of metal, and is sold individually. To access and replace this part you will need a nut driver, pliers, and screwdrivers. Before you begin any repair work, make sure you have unplugged your appliance, and shut off the water supply if applicable.

Order within the next 8 hrs and your part ships today!
$4.37

Fold Away Tine Pivot

Order within the next 8 hrs and your part ships today!
$4.89

Door Cable Link

This is a part for your dishwasher. The door cable link helps to keep the door steady and give support to the weight of the door when it is being opened or closed. If you notice the door latch has failed or the door is not closing properly, this might indicate a need to have the door cable link replaced. To perform this repair, you will start by turning the power off from the appliance. You will need to pull the unit out of installation. To access the cables, you will need to remove the side panel. You should be able to see the cables underneath the panel once removed.

Order within the next 8 hrs and your part ships today!
$20.45

Wash Impeller

This impeller rotates and is used to force water up through to the spray arm.

Order within the next 8 hrs and your part ships today!
$89.25

Accumulator Filter

This part is essential in your dishes getting clean during the wash cycle. If there is any debris or a tear in the filter, it can cause extra buildup and, therefore, causing dirty dishes.

Order within the next 8 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Handle jammed and door wouldn't open on Maytag Quietseries 100 dishwasher

  • Customer: Philip from Carlsbad, CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 544 of 559 people found this instruction helpful
I Followed others' instructions already posted to replace the whole handle assembly. In particular, use a big screwdriver placed against the bottom of the handle and whack the grip with the palm of your hand to get the handle to move back to the open position so you can open the door and start the job. I am no handyman, but this fix was easy, about 30 minu... read more

Door release latch handle was broken. The handle was deeply recessed into the door and the door was difficult to open.

  • Customer: Dave from Livonia, MI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 517 of 519 people found this instruction helpful
Remove the 8 or 9 torx screws holding the inner and outer door assembly together (leave the bottom screws in), lift the old handle assembly out, transfer the switches to the new handle assembly, and reassemble door. read more

One of the wheel assemblies fell off and melted in the dishwasher.

  • Customer: Kathryn from Oak Creek, CO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 473 of 480 people found this instruction helpful
I ordered the part and snapped it on. It was so easy to find the part on the website and it came very quickly. I am a satisfied customer! read more