This suspension spring is 7 inches in length, and is sold individually. It is a good idea to replace all six springs at once to maintain the same tension level. To complete this repair you will need a...
This drain pump with pulley, also known as the washing machine drain pump assembly, is a pump with two ports. The function of this pump is to help expel water from your washing machine. The pump is ac...
The snubber ring is a piece that is specific to your washing machine. The function of the snubber ring is to reduce noise and vibrations within your washer. It fits in between the leg and the dome ass...
This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time. If your machine is not draining properly or if it is noisy and s...
This transmission pulley and bearing kit, also known as thrust bearing kit or washer pulley and bearing kit, includes the pulley, washer, thrust bearing, two upper race washers, and one lower race was...
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This ...
This is a replacement lid switch actuating cam for your washer. The cam is located on the underside of the washer lid, near the hinge. The cam actuates the lid switch, so your washer knows the lid is ...
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...
The pin on the lid pushes on the lever of the lid switch to tell the machine that the lid is closed.
$56.45
In Stock
Questions And Answers for MAV7700AWW
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sandy
December 22, 2023
Dirt on clothes after spin cycle.. Is there a clean out for the tub?
For model number MAV7700AWW
Hi Sandy, thank you for your inquiry. The dirt on clothes after the spin cycle can be due to the dirty tub. In order to clean the tub, set your washing machine to the highest and hottest water setting. Add in four cups of white vinegar and start a cycle. Once the washing machine is filled up and barely started, pause it and allow the water and white vinegar to soak the drum for an hour. When the first rinse cycle has ended, pour in a cup of baking soda and turn your top loader back on for one more powerful cycle with the hottest settings. When that is done, leave the top open to let it air dry. We hope that helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Marcelle
June 24, 2021
Will not spin water out. I had been using it with no hot water for awhile. For awhile all I could get was either hot{real hot) or cold. Then it got where all I could get was just cold. We had a man come and look at it and said it was not worth fixing. Does this sound like he might be right. The washer is probable 15 plus years old
For model number MAV7700AWW
Hello Marcelle, Thank you for the question. If the drum is still spinning but the water is not draining, we suggest replacing the Drain Pump. For the Cold and Hot water issues you may need to replace the Water Inlet Valve that controls the water that fills the tub. We hope this helps!
Hello Liborio, thank you for reaching out. We have attached a relevant video that will help you in replacing the suspension spring. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Lay washer on front, removed belt. Removed center pulley with thrust bearing (pulley was worn on upper end, against thrust bearing, thrust bearing was worn also). Installed new thrust bearing & pulley kit. Cleaned & lubed slots that motor insulators slide in, installed new belt.
Unlug the AC cord,open the top from the front it snaps open with a little force and hinges on the back, remove the 2 screws on the front cover and take it off, tip the washer and remove the belt, take off the pump hose from the back (I removed the back cover also) and the little hose going to the basket. Remove the 6 springs and lift the
... Read morecomplete drum out of the waser and turn it upside down. You can see the plastic snubber ring that is worn, loosen the 6 screws just enough to get the old ring out and the new one in. WARNING (DO NOT TAKE THE SCREWS ALL THE WAY OUT OR THE BRAKE ASSEMBLY WILL RELEASE AND A SPECIAL TOOL IS NEEDED TO PUT IT BACK) Install the new ring, tighten the screws and put the tub back in connecting everything back up and use the 6 new springs. It really isn't that hard to do.