Models
>
MAV4057AWW
MAV4057AWW Maytag Washer - Overview
Sections of the MAV4057AWW
[Viewing 8 of 8]
Manuals & Care Guides for MAV4057AWW
Click to downloadKeep searches simple, eg. "belt" or "pump".
Suspension Spring
PartSelect #: PS11738823
Manufacturer #: WP21001598
This suspension spring is 7 inches in length, and is sold individually. It is a good idea to replace all six springs at once to maintain the same tension level. To complete this repair you will need a...
$11.80
In Stock
Drain Pump with Pulley
PartSelect #: PS11741799
Manufacturer #: WP35-6465
This drain pump with pulley, also known as the washing machine drain pump assembly, is a pump with two ports. The function of this pump is to help expel water from your washing machine. The pump is ac...
$84.63
In Stock
Snubber Ring
PartSelect #: PS11738845
Manufacturer #: WP21002026
The snubber ring is a piece that is specific to your washing machine. The function of the snubber ring is to reduce noise and vibrations within your washer. It fits in between the leg and the dome ass...
$13.11
In Stock
Transmission Pulley and Bearing Kit
PartSelect #: PS2003651
Manufacturer #: 12002213
This transmission pulley and bearing kit, also known as thrust bearing kit or washer pulley and bearing kit, includes the pulley, washer, thrust bearing, two upper race washers, and one lower race was...
$69.83
In Stock
Drive Belt - 52 inches long
PartSelect #: PS11739438
Manufacturer #: WP22003483
This washing machine drive belt is used with some clothes washers. This belt is all black in color and is made entirely of rubber.
$37.77
In Stock
Timer Knob Base
PartSelect #: PS11739297
Manufacturer #: WP22001659
This timer knob is not quite three inches in diameter. It is all gray in color and it is made entirely of plastic. This has a D-Shaped Shaft.
$23.31
In Stock
Hose Clamp
PartSelect #: PS11743008
Manufacturer #: WP596669
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This ...
$11.80
In Stock
Timer Knob Insert Cap
PartSelect #: PS11739300
Manufacturer #: WP22001664
This timer knob insert cap is just over two inches in diameter. It is all white in color and is made of plastic.
$11.10
In Stock
Motor with Pulley
PartSelect #: PS11738839
Manufacturer #: WP21001950
This motor is a 2 speed, 1/2 HP, 120V, 60Hz.
$163.40
In Stock
Lid Switch Actuating Cam
PartSelect #: PS11723080
Manufacturer #: W10814230
This is a replacement lid switch actuating cam for your washer. The cam is located on the underside of the washer lid, near the hinge. The cam actuates the lid switch, so your washer knows the lid is ...
$9.76
In Stock
Lid Switch Assembly
PartSelect #: PS2003435
Manufacturer #: 12001908
This kit includes the lid switch and the plunger. The pin on the lid pushes on the lever of the switch to tell the machine that the lid is closed.
$57.33
In Stock
Hose Clamp
PartSelect #: PS11740613
Manufacturer #: WP285655
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...
$11.10
In Stock
Questions And Answers for MAV4057AWW
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
November 22, 2022
Why does the spin cycle sound like a jet engine
For model number MAV4057AWW
Hello David, thank you for your inquiry. If you hear noises when the washing machine is in spin mode, it means that the tub bearing is worn out or the transmission pulley is faulty. You may need to order the Transmission Pulley and Bearing Kit, part number PS2003651, to fix the problem. If you require assistance placing an order, please contact customer service. We hope that helps!
Was this helpful?
Thank you for voting!
Related Parts:
Transmission Pulley and Bearing Kit
$69.83
In Stock
Justin
December 30, 2023
I have this model washer. Everything work but has started making a noise that sounds like a bearing going bad maybe. It's difficult to move and work on.
My question is what other preventative parts should I order and replace in the process? Thanks for any suggestions.
For model number MAV4057AWW
Hello Justin, thank you for your inquiry. Based on the description that you have provided, we would recommend replacing the bearing, part number PS11741784, to fix the issue. Glad to be of help!
Was this helpful?
Thank you for voting!
Related Parts:
Spin Bearing
$29.64
In Stock
Tim
February 12, 2024
Sometimes, when washer is finished with spin cycle, it will make a loud bearing squeal noise, for just a few seconds, when it completes spin cycle....everything else with washer runs like new.....What would cause this ?
For model number MAV4057AWW
Hello Tim, thank you for getting in touch. Based on our understanding of the issue, we would suggest checking the drive pulley, part number PS2003651, to solve the problem. Glad to be of help!
Was this helpful?
Thank you for voting!
Related Parts:
Transmission Pulley and Bearing Kit
$69.83
In Stock
- < Prev
- 1
- Next >
Common Symptoms of the MAV4057AWW
[Viewing 10 of 10]Leaking
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Burning smell
Fixed by
these parts
these parts
Show All
Will not agitate
Fixed by
these parts
these parts
Show All
Will not drain
Fixed by
these parts
these parts
Show All
Spins slowly
Fixed by
these parts
these parts
Show All
No hot or cold water
Fixed by
these parts
these parts
Show All
Shaking and Moving
Fixed by
these parts
these parts
Show All
Lid or door won’t close
Fixed by
these parts
these parts
Show All
Spinning Issues
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
washing machine was making alot of noise
I found the water pump bearings were going bad from humidity. I replaced the pump with a new one and it runs quiet again.
Parts Used:
-
David from Boca Raton, FL
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers, Wrench set
561 of 571 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer tub would not spin, pump would empty water from tub.
Lay washer on front, removed belt. Removed center pulley with thrust bearing (pulley was worn on upper end, against thrust bearing, thrust bearing was worn also). Installed new thrust bearing & pulley kit. Cleaned & lubed slots that motor insulators slide in, installed new belt.
Parts Used:
-
James from Hueytown, AL
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set
349 of 396 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer jumping in spin cycle (white flakes under the washer)
Unlug the AC cord,open the top from the front it snaps open with a little force and hinges on the back, remove the 2 screws on the front cover and take it off, tip the washer and remove the belt, take off the pump hose from the back (I removed the back cover also) and the little hose going to the basket. Remove the 6 springs and lift the
... Read more
complete drum out of the waser and turn it upside down. You can see the plastic snubber ring that is worn, loosen the 6 screws just enough to get the old ring out and the new one in. WARNING (DO NOT TAKE THE SCREWS ALL THE WAY OUT OR THE BRAKE ASSEMBLY WILL RELEASE AND A SPECIAL TOOL IS NEEDED TO PUT IT BACK) Install the new ring, tighten the screws and put the tub back in connecting everything back up and use the 6 new springs. It really isn't that hard to do.
Read less
Parts Used:
-
David from Butler, PA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Screw drivers, Wrench set
288 of 301 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!