LW1016E LG Air Conditioner - Overview
Models starting with LW1016E
Click on the best match to narrow your results.
- LW1016E LG Air Conditioner
- LW1016ER (AT1AUSL) LG Air Conditioner (Model Lg Lw1016er.At1ausl 10,000 Btu Window Air Conditioner – Common Parts And Diagrams)
- LW1016ER LG Air Conditioner (LG Air Conditioner Model LW1016ER Parts)
- LW1016ER (00) LG Air Conditioner (Lg Lw1016er/00 Room A/C)
- LW1016ER (AT1AUSB) LG Air Conditioner
- LW1016ER (AT1AYOW) LG Air Conditioner
- LW1016ER (ASWAUSH) LG Air Conditioner
- LW1016ER (AT1AUSH) LG Air Conditioner
- LW1016ER (AT1AHDP) LG Air Conditioner
- LW1016ER (ASWAYOW) LG Air Conditioner
- LW1016ER (AT1AHDS) LG Air Conditioner
- LW1016ER (ASWAUSA) LG Air Conditioner
- LW1016ER (ASWAHDP) LG Air Conditioner
- LW1016ER (AC1AUSB) LG Air Conditioner
Keep searches simple, eg. "belt" or "pump".
Remote Control Assembly
PartSelect #: PS11760970
Manufacturer #: AKB73795706
This remote control is a device for adjusting your air conditioner settings. It requires two AAA batteries for operation. A malfunctioning remote control may have unresponsive buttons or signs of phys...
$46.34
In Stock
Room Air Conditioner Installation Kit
PartSelect #: PS7784777
Manufacturer #: 3127A20074Y
The installation kit contains the hardware you need to install the room air conditioner.
$60.51
In Stock
FAN,AXIAL
PartSelect #: PS12747824
Manufacturer #: 5900A10009E
The condenser fan blade fits onto the air conditioner motor shaft. The fan blade helps circulate air over the condenser to cool the refrigerant before it enters in to the evaporator. This part is beig...
$60.51
Special Order
Clamp,Spring
PartSelect #: PS3522762
Manufacturer #: 3H02932B
This spring clamp is designed for your room air conditioner. This clamp holds the fan blade on the motor shaft so it can rotate during operation. If your fan blade is wobbling on the motor shaft, you ...
$8.55
Special Order
PCB ASSEMBLY,DISPLAY
PartSelect #: PS12080893
Manufacturer #: EBR83548602
Designed to optimize your room air conditioning experience, the LG Display and Power control board is a crucial component that enhances your unit's functionality. It effortlessly showcases the selecti...
$90.33
Special Order
CLAMP,SPRING
PartSelect #: PS16224004
Manufacturer #: MBU64446301
The fan blade clamp, also known as a clamp spring, are for air conditioners. The clamp supports the fan blade on the motor shaft. When the motor is running, it signals the shaft to turn and rotate, bu...
$8.55
In Stock
Electronic Control Board
PartSelect #: PS12080903
Manufacturer #: EBR83604002
Enhance the functionality of your LG room air conditioner with the Electronic Control Board. This genuine original equipment manufacturer (OEM) part is designed to regulate key operations such as temp...
$79.80
On Order
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broken fan axial blade
Unscrewed the unit from the exterior case pulled out the unit unscrewed the 4 screw that hold the fan shroud carefully unscrewed the coil pulled back unclipped the axial fan clip gentlyhit with rubber mallet replacement of new fan replaced clip
15 minutes best investment of 20 bucks as apposed to 400 $
15 minutes best investment of 20 bucks as apposed to 400 $
Parts Used:
-
John from HARLINGEN, TX
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
8 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
compressor staying on, even in OFF mode: failed compressor relay on Printed Circuit Board #EBR895407
PC Board #EBR895407 No Longer Available, replaced with #EBR7773051 - mirror image board, but wires long enough and connections same.
Unit unplugged: slide filter up and out. Remove two phillips screws behind where top of filter was to remove grill (easier done with magnetic screw driver). Remove two phillips screws, one each side, at ... Read more base of cabinet. Slide assembly out of cabinet 6-8". Remove phillips screw(s) on metal control panel housing. With needle nose, rock (2) main female spade connectors left/right until off (easier done with PC board still secured). Remove phillips screw holding plastic base of PC board. Viewing new board control connectors will simplify disconnecting the (3) control plugs. A small straight blade screwdriver can help.
Unit unplugged: slide filter up and out. Remove two phillips screws behind where top of filter was to remove grill (easier done with magnetic screw driver). Remove two phillips screws, one each side, at ... Read more base of cabinet. Slide assembly out of cabinet 6-8". Remove phillips screw(s) on metal control panel housing. With needle nose, rock (2) main female spade connectors left/right until off (easier done with PC board still secured). Remove phillips screw holding plastic base of PC board. Viewing new board control connectors will simplify disconnecting the (3) control plugs. A small straight blade screwdriver can help.
Read less
Parts Used:
-
Philip from NEW MARKET, VA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
window a/x unit fan broke
took apart the fan housing and replaced the fan saving me hundreds of dollars from buying a new unit
Parts Used:
-
margaret from CARRIERE, MS
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers
6 of 18 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!