Models > LSB5611SB > Instructions

LSB5611SB LG Range - Instructions

All Instructions for the LSB5611SB

Oven would initially start to heat up but would not hold its temp

I searched online and found someone that seemed to have the exact problem. That person had replaced the lower burner and the same PCB board I replaced. I was able to test the lower burner without removing it and it tested OK. The PCB board in the article I had checked was burned and obviously bad but mine was not. I took a chance and ordered just the PCB board. I replaced this board and the oven now works perfectly. I seems this board was not turning on the bottom burner but the system thought it was working fine.

Parts Used:

Range Oven Relay Control Board

Leonard from Plano, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

6 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

wouldn't turn on

simply take picture b4 you start then replace same way.

WARNING!!! MAKE SURE YOU HAVE RIGHT PART!! They are very slow to return any type of credit

Parts Used:

Radiant Heater

Michael from MILWAUKEE, WI
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Oven would not reach set operating temperature

Removed the back of the Range. Removed one wire at a time from the old PCB and placed it in position on the New PCB. Then secured the New PCB in the holder.

Parts Used: