LP120HEM LG Air Conditioner - Overview
Models starting with LP120HEM
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
FILTER,AIR
PartSelect #: PS12747807
Manufacturer #: 5230A20021E
This is a genuine LG air filter sourced directly from the manufacturer. It is designed for your LG air conditioning unit, and prevents dirt, debris, and other airborne particles from entering your hom...
$23.60
In Stock
Fan Assembly,Axial
PartSelect #: PS3528606
Manufacturer #: 5900AR1173A
The fan assembly or condenser fan blade fits on the motor shaft and circulates air over the condenser. This cools the refrigerant before it enters the evaporator. If the fan assembly in your room air ...
No Longer Available
Fan Motor
PartSelect #: PS3523199
Manufacturer #: 4681A20064N
Designed by the reputable brand LG, this Indoor Fan Motor Assembly is an ideal component for your air conditioning unit. As a genuine OEM part, the unit actively contributes to maintaining a comfortab...
No Longer Available
Cross Flow Fan Assembly
PartSelect #: PS3528627
Manufacturer #: 5901A10027A
The cross flow fan assembly (or evaporator fan blade) is used to produce an even airflow to keep components from overheating in your air conditioner. If you notice your air conditioner giving off warm...
No Longer Available
Clamp,Spring
PartSelect #: PS3522762
Manufacturer #: 3H02932B
This spring clamp is designed for your room air conditioner. This clamp holds the fan blade on the motor shaft so it can rotate during operation. If your fan blade is wobbling on the motor shaft, you ...
$8.55
Special Order
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Blower fan motor
Blower fan motor not working. Partselect representative he guide me. Make sure new motor diameter is wide. Purchase motor with mounting bracket. Old motor bracket will not working . my Ptac after installing new motor running smoothly.
Parts Used:
-
Nimesh from Urbana, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Motor mount broke due to imbalance caused by mud dobber nests.
Pulled PTAC out of wall sleeve, unhook wire harness from control area, remove condenser shroud and motor and fan blade all at the same time. Replaced motor bracket and re-installed in reverse order.
Parts Used:
-
Travis from LOUISVILLE, IL
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Capacitor went out
-
Al from CROSS PLAINS, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
2 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!