This crisper cover front support is used to keep the crisper shelf in place and may need replacing if the door will not open or close. This white, OEM part measures roughly 1 inch in diameter and can ...
$11.88
In Stock
Order within the next 1 hr and 44 mins and your part ships today!
This authentic rear crisper support is a white, plastic part which is rated as "easy" to install by our customers. This OEM part replaces the rear crisper cover support in your fridge and mounts to th...
$13.20
In Stock
Order within the next 1 hr and 44 mins and your part ships today!
The function of the Refrigerator Water Inlet Valve (Triple Solenoid Water-Valve, Water Valve, Water Inlet Valve, Refrigerator Water Inlet Valve Assembly) is to release water from the supply line when ...
$91.07
In Stock
Order within the next 1 hr and 44 mins and your part ships today!
This NSF-Certified OEM filter is white in color with a plastic housing and extruded carbon filter media. It measures 2.3-Inches deep, 9.1-Inches high and 2.3-Inches wide. It fits certain Frigidaire si...
$72.53
In Stock
Order within the next 1 hr and 44 mins and your part ships today!
If you find that there is excessive frost in your freezer, or the freezer will not defrost, you may need to replace the defrost thermostat. The defrost thermostat kit comes with the clip, leads, and h...
$20.58
In Stock
Order within the next 1 hr and 44 mins and your part ships today!
This 8-cube ice maker is used to create ice for your refrigerator. The ice maker receives water from the water inlet valve and will freeze until ice cubes are formed. Once the water has been frozen t...
$153.41
In Stock
Order within the next 1 hr and 44 mins and your part ships today!
This door bin holds items on the door of your refrigerator. They are sometimes called Cantilever Shelves as they are supported by the back of the shelf itself to the door of your refrigerator. Sold individually.
$53.31
In Stock
Order within the next 1 hr and 44 mins and your part ships today!
This dispenser crusher housing may also be known as a refrigerator ice crusher housing, and is compatible with your refrigerator. The function of the dispenser crusher housing is to shield the ice cru...
$64.56
In Stock
Order within the next 1 hr and 44 mins and your part ships today!
This door bin is for refrigerators.
Door bin attaches to the inside of the refrigerator door and typically holds jars and bottles.
Follow the instructions in the owner's manual for installing t...
$94.06
In Stock
Order within the next 1 hr and 44 mins and your part ships today!
This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. The run capacitor is attached to the compressor. This part is 120 volts a...
$51.77
In Stock
Order within the next 1 hr and 44 mins and your part ships today!
Questions And Answers for LFSS2312TF0
Ask our experts a question about this model and we'll get back to you as soon as possible!
6 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Barbara
June 24, 2021
Very funny. Lol. Where is the bulb located and how do i get to it?
For model number LFSS2312TF0
Hi Barbara,
Thank you for your question. The light bulb is located up in the control panel. We have included a link to a repair video from our YouTube Channel for the light socket, that will show you where the bulb is located and how to access it. We hope this helps! Good luck with the repair!
Hi,check inlet valve all check good, but still not getting water to ice maker and water despenor,what else could cause that problem, check inlet valve with ohm meter all at 240 ohms.
For model number LFSS2312TF0
Hello Barry, thank you for getting in touch. Based on our understanding of the issue, we would suggest checking the water filter, part number PS3412266, to fix the issue. A clogged water filter can also the water not getting to the ice maker and the water dispenser. We hope this solves your problem!
Will ANY 40 watt LED work for the main compartment?
For model number LFSS2312TF0
Hello Richard, Thank you for reaching out. This appliance requires a specific Bulb that was made to fit and work in this model, PartSelect Number PS12364857. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Barbara
June 24, 2021
How do i change the light bulb in my refrigerator
For model number LFSS2312TF0
Hi Barbara,
Thank you for your question. To change the light bulb, unscrew the old one from the light socket and screw in the new one. We hope this helps! If you have any questions, please let us know.
Hi Pat,
Thank you for your question. The part number for the 2 upper fresh food door bins is PS429767 and the part number for 2 lower fresh food door bins is PS430207. We hope this helps!
In my specific appliance the water valve is located in the bottom right hand corner looking at it from the back. To get to it I remove the thin layer of cardboard the covers the back of the fridge. I then proceeded to disconnect the 1/4" copper tubing which is the water feed coming out of the wall. Then I removed the screws that hold the
... Read more valve assembly in place. I took the water valve out and removed the electrical connections as well as the plastic tubing which feed the water dispenser and the ice maker. To install the new water valve it was just a matter of reversing steps.
Used pliers to remove the residual broken stud that was still attached to the wall of the refrigerator, and then just pushed the new part in place. The longest time was spent in removing the food and crisper drawers.
Even though my wife said that our icemaker broke, there was actually nothing wrong with it. It was the valve that let water flow in during the 'harvest' cycle. A real easy way to test the icemaker without voltage and current measurements, is to fill the tray by hand with a little cup of water; wait till the water freezes and see if t
... Read morehe maker dumped the ice into the bin.