This OEM 40 watt appliance light bulb is used for some ranges, refrigerators, freezers, and microwaves. Simply locate the existing bulb, unscrew it from its socket, and replace with new light bulb. If...
Oven racks can become rusted or damaged from constant use, and need to be properly maintained and cleaned to keep them working properly. If you notice that your oven rack has been damaged or rusted, t...
This part is a replacement electronic clock/timer for your oven. The clock timer will display the time, and can be used to set a timer. If the clock will not start, will not allow you to program the t...
This tempered glass is supplied by the original manufacturer and measures 20 inches by 13 inches. It is an inner door glass, designed for use in ranges/ovens and has several purposes which include pro...
The surface Meduim 9.5K burner cap is located on the top of the burner head and is used in ranges and ovens. The burner cap helps spread out the burner flame for even heating, and protects the burner...
The anti-tip bracket kit comes with one metal bracket and two installation screws, and is sourced directly from the genuine manufacturer. It prevents the freestanding oven, range, or stove from tippin...
This part is the igniter/orifice mounting screw for your cooktop or range. It is approximately ½ an inch in length and is made of metal. The mounting screw connects the orifice to the cooktop. If the ...
Ask our experts a question about this model and we'll get back to you as soon as possible!
10 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Todd
December 27, 2022
Oven quit working ,cannot be reset and digital display is half working
For model number LFGF3052TFA
Hello Todd, thank you for contacting us. The issue is most probably related to a faulty control board, part number PS12717913. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
Hi Victoria, thank you for your inquiry. Based on our research, your model does not come with the top broiler element. It comes with the broiler drawer. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
WAYNE
March 12, 2020
All igniters spark at same time
For model number LFGF3052TFA
Hello Wayne, thank you for your question. If all of your igniters are sparking at the same time, this would lead us to believe there is an issue with the spark module, PartSelect number PS11770793, or the surface burner ignition harness, PartSelect number PS3409147. Unfortunately, the ignition harness is discontinued per the manufacturer and we have no alternate part showing as a replacement in our system. We hope this helps.
Was this helpful?
Thank you for voting!
WAYNE
March 12, 2020
Plug stove in all ignitors start sparking
For model number LFGF3052TFA
Hello Wayne, thank you for your question. If all of your igniters are sparking at the same time, that indicates an issue with either the spark module, PartSelect number PS11770793, or the spark ignition wire harness, PartSelect number PS3409147. Unfortunately, the wire harness is discontinued per the manufacturer and we do not show any substitute part number that may take its place. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
I am an HVAC tech by trade so it wasn't difficult to diagnose problem with safety valve. The hard part was being without an oven for a week. Repair was simple and effective--oven works good as new. Shut off gas and unplugged oven. Removed floor of oven between broiler and bake section, used wrenches to disconnect gas line from saf
... Read moreety valve in back of oven, used philipps head screwdriver to remove burner assembly and gas valve, reversed process to replace. Checked out operation--OK.
The repair of the oven was really easy . I removed a total of 7 screws with a 1/4 inch nut driver to remove the back cover of the instrument panel. I then unplugged the wires from the from the oven control and with a phillups screw driver I removed 4 screws that hold the oven control,the face plate with the words on it has to be taken of
... Read moref the old control and put on the new one . I then installed the new oven control by putting the 4 screws back on and plugging back the wires. I then replaced the back cover with the 7 screws and plugged the power back in the outlet, The clock has to be adjusted and your done.
Turned off power, took back off stove removed old probe. I had to splice wires since new probe ends did not match up. the instructions were to splice the wires. I had the breaker off for about 3 hours. this is not in the instructions, but being a widow, I had to ask a few people why it would not come on after I connected the wir
... Read morees. After waiting, I turned the breaker on and my range came back on.