Quick Question!

Have you ever purchased from PartSelect.com before?

Models > LDF9932ST

LDF9932ST LG Dishwasher - Overview

Parts and Repair Help for models starting with LDF9932ST

If you know the dishwasher repair part you need, you can browse the list of all parts for models starting with LDF9932ST, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Models starting with LDF9932ST

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$8.63

Connector Assembly

This dishwasher door hinge cable assembly connects the door to the spring. The door hinge cable and the door spring apply tension to the door to prevent it from dropping open too q...

$4.35

Roller Assembly

The dishwasher roller assembly connects to the dishrack, and is located in the upper level of the dishwasher. It allows the dishrack to easily slide in and out. If the upper rack keeps falling off the track in your dishwasher, makes noises, the door will not close, or the dishes are not getting clean, then it is best to replace it for more security. A flat blade screw driver is the only tool needed for this installation. Open the upper dishwasher rack and remove retaining tabs from both ends of the rack and slide it out. Locate the older roll assembly, remove it and replace the rollers. Remember to put the tabs on each side back before sliding it back in. Make sure the dishwasher is off before starting this installation project.

$8.63

Spring,Hinge

The door spring, used in dishwashers, adds tension to the door through the door hinge to keep it from opening too fast. If you have a door latch failure or your washer door drops t...

$59.13

Circulation Pump Motor - 120V 60Hz

On a washer, this part is used for circulating the water. On a dishwasher, it is used for draining the water during operation. If you notice your appliance is not draining properly, the circulation pump motor may need to be replaced. If this part is for your washer, you may notice your clothes are not cleaning properly. In your washer, to access this part you will need to remove the entire front panel. The circulation pump is 120 volts and 30 watts. The part is white in color and is sold individually. This OEM part comes directly from the manufacturer.

$21.72

Accessory Assembly

This is an accessory assembly, otherwise known as a mounting bracket kit, for a dishwasher. This kit includes two brackets, a hose clamp, and two screws. The brackets are perforate...

$29.84

Basket Assembly,Spoon

This is called a basket assembly, but it may also be known as a silverware basket and it is used in conjunction with your dishwasher. The purpose of this part is to sit on the lower dishrack, and be a stable place for your silverware to rest during the dishwashing cycle. This part is made entirely of plastic, and it is gray in color. The basket measures to be roughly 3 inches wide, by 10 inches high, by 18 inches deep. This specific model has a handle, and all three compartments have a flip top.

$4.35

Pump Gasket

This is a pump gasket, also known as a pump housing seal, for a dishwasher. The gasket is fitted around the edge of the pump, preventing leakage between the pump housing and the fi...

$36.99

HOSE ASSEMBLY, DRAIN

Replacement dishwasher drain hose. Per the manufacturer if the drain hose being replaced does not have the vent tube going to the water inlet assembly a new water inlet will be needed.

$28.71

Door Gasket - Black

This is a door gasket for a dishwasher. It creates a watertight seal between the dishwasher door and tub to prevent leaking while the appliance is in use. The gasket is approximate...

$113.99

Circulation Motor Assembly

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broken door spring allows the door to overextend to the floor if not propped.

  • Customer: Gregory L from INDEPENDENCE, OH
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 5 of 5 people found this instruction helpful
Simple, removed screws securing machine in the cabinet, then pull the unit out of the cabinet space about 10 inches. Springs are accessible within this extension. You need strong hands to extend the springs and attach them. Once attached, push machine back in place and re-install the anchor screws. In my situation, only one spring was broken, so the attached... read more

Dispenser wasn't closing

  • Customer: Kristyn from Downers Grove, IL
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 5 of 6 people found this instruction helpful
Unscrewed the screws, displaced the dispenser and re installed the screws read more

Two Rollers missing on lower tray.

  • Customer: Thomas from BOYNTON BEACH, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 4 of 6 people found this instruction helpful
Snapped the rollers on. read more