The faucet adapter for your portable dishwasher or washing machine attaches to the faucet and allows you to connect the machine to the tap. Before you install the faucet adapter on your taps, be sure ...
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to...
If your clothes washer is leaking, it is likely that there could be an issue with one of the hoses. If the hoses are in working order, you should check the washers connecting the hose to your unit. Ru...
This six piece washing machine syphon break kit for is intended for use with plastic drain hoses. Use this kit with your Whirlpool/Kenmore brand washing machine.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
6 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Floyd
February 2, 2020
Our machine will not spin while the water is draining from each cycle
For model number LCE4332PQ1
Hi Floyd,
Thank you for your question. If the washer is not spinning, there are some parts that you will need to check to see which one is causing the issue. You will need to check the lid switch, the belt, the motor, the motor pulley, the outer tub with bearing, the tub seal, the gearcase, the interface board and the electronic control board. We hope this helps. Thank you and have a great day.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Sophia
January 4, 2020
The 2nd wash doesn't drain all the way
For model number LCE4332PQ1
Hello Sophia and thank you for writing.
It certainly sounds like it could be a faulty water pump PS8768670, you should check for signs of damage, and replace if necessary. We hope this helps. Please contact us anytime.
I don’t have water hook ups anywhere near where I’m able to put my washing machine. Is there a way to manually fill it with water? If so how do I do it? I tried and it just drains it all out.
For model number LCE4332PQ1
Hello Meagan, Thank you for writing. Other then filling the tub with buckets of water or a hose, there would be no other way to fill the tub. For more specialized assistance or to speak with someone about this, I would suggest calling the manufacturer of the appliance directly. We hope this helps.
Was this helpful?
Thank you for voting!
Luis
November 17, 2023
My washing machine have a water leak .from that bottom.can you help me .please . Thank you.
For model number LCE4332PQ1
Hi Luis,
Thank you for your question. If water is leaking from the bottom of the washer, it may be coming from the pump. You should also check the internal water lines for signs of cracks or damage and to make sure they are fitted correctly. We hope this helps!
Was this helpful?
Thank you for voting!
Autumn
December 20, 2023
One of this number straps broke and we've kind of fixed it but then when we went to try to do a cycle it will not stop filling with water
For model number LCE4332PQ1
Hello Autumn, thank you for contacting us. Based on our research, the issue is with the water level switch, part number PS11741020. It controls the water level inside the washer tub. You may need to replace it to fix the issue. Glad to be of assistance!
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
We had the washer for more than 10 years, and the hose start leaking. We were happy with our whirpool washer and wanted just to replace the hose. Thanks to partselect.com we found the part we needed and hope to use our washer for many more years.
