KFRU368VSS00 KitchenAid Grill - Overview
Sections of the KFRU368VSS00
[Viewing 7 of 7]Keep searches simple, eg. "belt" or "pump".
Surface Light Bulb
PartSelect #: PS886465
Manufacturer #: 8204670
This surface light bulb is used in ranges and microwaves. It has a high voltage of 12 and 10 watts. This bulb illuminates and directs light at the bottom of the microwave or the inside of it. It also ...
$23.05
On Order
Range Ground Screw
PartSelect #: PS11742546
Manufacturer #: WP4449743
Sold Individually.
$7.30
In Stock
Metal Screen
PartSelect #: PS2377963
Manufacturer #: W10294369
Used with outdoor grills.
No Longer Available
Rod Kit
PartSelect #: PS2378199
Manufacturer #: W10303326
As per the factory - this kit contains 6 rods with screw nuts and washers.
No Longer Available
Heating Element
PartSelect #: PS11748833
Manufacturer #: WPW10134795
Used with gas grills.
$234.07
In Stock
Surface Burner Orifice Holder
PartSelect #: PS11750959
Manufacturer #: WPW10244714
$62.17
Special Order
Manuals & Care Guides for KFRU368VSS00
Click to downloadInstall
Installation Instructions
(1.89MB)
Install
Installation Instructions
(9.78MB)
Manual
Owner's Manuals
(1.89MB)
Questions And Answers for KFRU368VSS00
Be the first to ask our experts a question about this model!
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Common Symptoms of the KFRU368VSS00
[Viewing 1 of 1]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Igniter went out with that light
-
David from FRESNO, CA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
light bulbs nedd to repace it.
-
Jorge from Bay Point, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
45 of 196 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Screen for searing burner had burnt out and needed replacing
Screen is held in place with 6 screws into spacers keeping it away from the burner. Screws were totally frozen and could not be loosened, even with WD 40. They had to be cut off and now the screen is not secured. I will need new spacers but they will be very difficult to remove. This s a very poor design.
Parts Used:
-
John from Hayesville, NC
-
Difficulty Level:Very Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Screw drivers, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!