KFDC506JYP01 KitchenAid Range - Overview
Sections of the KFDC506JYP01
[Viewing 2 of 2]
Keep searches simple, eg. "belt" or "pump".
Dryer Screw
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$7.47
In Stock
Terminal Block
PartSelect #: PS11747341
Manufacturer #: WP9761958
This is the terminal block for the power cord on an electric range.
$29.47
In Stock
Cooktop Cleaner
PartSelect #: PS3492527
Manufacturer #: W10355051
This bottle of non-abrasive cooktop cleaner breaks down and gets rid of the hardest baked-on stains and residue without causing any harm to your appliance. The bottle is 10 oz and does not require a l...
No Longer Available
Range Hex Nut
PartSelect #: PS11738304
Manufacturer #: WP112432
This 10-32-inch hex nut works with multiple appliances in your home as a fastener. This specific model is sold individually. Hex nuts usually have 6 even sides and together they are used with bolts an...
$7.47
In Stock
Blower Fan
PartSelect #: PS12584130
Manufacturer #: W11248652
Introducing the Whirlpool BLOWER, an authentic OEM part. This essential component is compatible with select models of Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef. Prominent ...
$156.96
In Stock
Medallion, Handle (new Gold)
PartSelect #: PS12753592
Manufacturer #: W11368841NE
$143.62
Special Order
Accessory Parts, Medallion, Handle (new Gold)
PartSelect #: PS12753589
Manufacturer #: W11368841CF
$101.13
Special Order
Questions And Answers for KFDC506JYP01
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the KFDC506JYP01
[Viewing 2 of 2]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
bought floor model with loose cord that melted block terminal
Safety first always shut breaker off at box.
I unplugged stove, disconnected wires keeping in mind the color placement. Unscrewed one ground screw and removed terminal block. Attached new block with ground screw, replaced wires in correct order, re-attached plug. Then reattached safety cover. Pretty simple for d.i.y.
I unplugged stove, disconnected wires keeping in mind the color placement. Unscrewed one ground screw and removed terminal block. Attached new block with ground screw, replaced wires in correct order, re-attached plug. Then reattached safety cover. Pretty simple for d.i.y.
Parts Used:
-
larry from alexandria, IN
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers, Socket set
19 of 21 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burned Out Termincal Block
I discoverd my switch box locked with my stove electrical port and stove stopped functioning. Pulled my stove back and saw that the "terminal block" was melted on one side; hence, switch box locked in place to avoid a fire, thank goodness. Looked up part on internet, unplugged stove, took off terminal box, ordered part and replaced. BT
... Read more
W - PART SELECT is awesome; I received my part the very next day!!! :-) Very happy with their service.
Read less
Parts Used:
-
Jeffrey from Davie, FL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers, Socket set
16 of 18 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
someone did not install cord properly! they left a strong strain on one of the 3 wires, with a loose nut connection that caused it to heat and melt the plastic that poped out toward the rear metal cover and short circuited.
I cut the ends of the cord and went with direct wire (no round eye clip) to the back side of the terminal block and tightened firmly. It took about 20 Minutes.
Parts Used:
-
Richard from Daytona Beach, AL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
16 of 21 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!