Parts That Fix KitchenAid Dishwasher KDTE104ESS3 Leaking

This pump inlet grommet is a genuine OEM replacement part that is compatible with various models of dishwashers. It is made of rubber and has a diameter of approximately 2.5 inches. The grommet is used to create a watertight seal in the area between the inlet hose and the circulation pump. This prevents the dishwasher from leaking, and it also helps to absorb minor shocks and vibrations that occur while the dishwasher is running. It is normal for the grommet to wear down over time or become damaged from exposure to water, heat, and chemicals.

This works in conjunction with the pump and filtration system. It is used to receive drainage for disposal.

This fill hose is a genuine OEM replacement part for your dishwasher. The hose is made of black plastic, and is accordion-style, for ease of movement within your dishwasher. To replace the fill hose, you will need a 1/4 inch nut driver, Channellock pliers, and a Phillips screwdriver. Replacing this part will require some disassembly, such as removing the water inlet valve from the fill hose, and the clamps which secure the hose in place. Reuse your existing clamps when securing your new fill hose in place.

This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This clamp is used to securely attach a hose to another part of your appliance, which helps prevent leaks from those connections. Depending on the appliance, it can attach hoses to drain pumps, water inlet valves, pressure switches, and injector nozzles. We recommend you refer to model-specific diagrams for appropriate uses and exact placement. This hose clamp is made of metal, and is sold individually. To access and replace this part you will need a nut driver, pliers, and screwdrivers. Before you begin any repair work, make sure you have unplugged your appliance, and shut off the water supply if applicable.

This part is used to drain water from your dishwasher.

The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be careful if you do not have specific clamp pliers as the clamp could fly off. Once the front of the washer has been removed, take a quick look for water damage or any obvious signs of where the leak is coming from. If it is not obvious, run water to test.

This part is also known as a float switch. This float switch, when activated, stops the flow of water into the dishwasher.

Introducing the Whirlpool Dishwasher Pump Hose, a genuine OEM part designed for use in some models of Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef dishwashers. This crucial component takes on the task of supplying water between the circulation pump and the sump within your machine. Artfully engineered to hold up to demanding usage, this hose provides a durable, quality connection that helps your dishwasher function at its best. As a gentle reminder, do ensure the accuracy of your model before placing an order as part sizes may slightly vary. For installation, remember to disconnect the power and don work gloves for protection. Trust in the reliability of Whirlpool with this Dishwasher Pump Hose.

Also known as a washer.

This is connected to the water valve, is located on the side of your tub and allows water to enter your dishwasher. ***Note: This part does not include the inlet gasket - must order separately.

This dishwasher water level float helps monitor and regulate the amount of water inside the tub to prevent overfilling during operation. Made from durable black plastic, the float rises with the water level and activates a safety switch to stop water flow once the correct level is reached, supporting proper wash performance and protecting the appliance from leaks or overflow. Replacing a worn or stuck float can resolve issues such as overfilling, underfilling, or cycle interruptions. Installation typically involves removing the lower rack and securing the float in its designated opening, ensuring it moves freely before reassembling the dishwasher.

Introducing the Whirlpool Hose Clamp, designed with both quality and efficiency in mind. This genuine OEM part plays an essential role in your dishwasher's functionality. Applied to hold the end of the water hose securely, it effectively prevents any potential leaks. It's essential to disconnect the water supply and electricity and use appropriate hand protection before installation. This versatile clamp works seamlessly with Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef models. Ensure the part number corresponds with your appliance model prior to purchase, as small variances in shape and size may occur.

Sold individually.

Water inlet gasket WP8531323 is a water inlet gasket for dishwashers. It ensures a watertight seal at the point where water enters the tub, preventing leaks and maintaining efficient water flow during the wash cycle.

Are you looking to bring your GE oven back to its best performance? Take a look at our GE Oven Door Gasket, the perfect solution to your cooking troubles. This important component creates a tight seal around your oven door, securing the heat inside. By doing so, it ensures that your oven works at peak efficiency, resulting in your meals being cooked to perfection every time. What's great about this door gasket is that it?s made specifically for GE appliances. This certainly means fewer worries about fitting issues and compatibility. Just make sure the oven surface is cool before you begin the easy installation process. By taking care, you'll keep your oven in perfect shape and continue to cook up delicious meals for the whole family. So, don't let a worn-out part keep you from enjoying your cooking. Get your GE Oven Door Gasket today and experience the joy of a well-functioning appliance again.

This genuine Whirlpool cover is a key component of your dishwasher, compatible with several models under the Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef lineups. It serves as a sump cover, attached to the tub bottom, channeling and collecting water directly into the pump to ensure optimal functioning. For your safety, we recommend unplugging the dishwasher or switching off the house circuit breaker before installing this piece. A pair of work gloves is also advised to guard your hands during installation. Be certain of the part number's compatibility with your particular model before purchasing. Its design may vary in size and shape so a precise fit is essential for appropriate functioning.

This part is a door balance link kit, also sometimes known as door cable or door spring cable kit, that helps support the door as it opens and closes by connecting to the dishwasher door hinges. The kit includes two door balance links and two door balance mounts with wheels, which will replace both the left and right sides. The only tool needed is a 5/16 nut driver. Before removing the existing kit, take note of how the door balance link kit is assembled for a smooth replacement process. It is recommended to check the door springs in case they need to be replaced as well.

This is a door latch for various dishwashers. Door latches are designed to communicate with the control board of the dishwasher when the door is closed and latched shut. If your dishwasher is not latching shut properly, or if your dishwasher will not start when the door is shut, then this latch is likely broken or bad. To replace this door latch, you will need a screwdriver or drill, and a set of pliers. This latch is sold individually, and does not come with any securing screws or other parts.

Introducing the Whirlpool Dishwasher Door Brace, a genuine Whirlpool part designed to notably enhance the performance of your dishwasher. This durable brace, specially engineered to replace the flat panel vapor barrier, has been crafted with a rod to keep the hinges straight, ensuring better alignment and longevity of your dishwasher door. This component assists in reinforcing the rear of your dishwasher tub, adding to the overall structural integrity. Designed for easy installation, you'll want to disconnect power and shut off the water supply before beginning to ensure a safe process. It's recommended to verify the correct part for your enterprise model before acquisition. Turn to Whirlpool's trusted reliability for this exceptional dishwasher door brace to keep your unit running smoothly.

Shield

If your dishwasher isn’t draining properly or leaving water behind, this drain pump motor assembly might be the fix you need. It helps clear water from the tub during the drain cycle, keeping your appliance running smoothly and your dishes clean. This genuine replacement part is made to fit a variety of models from Whirlpool and related brands like Kenmore, KitchenAid, and Amana, making installation straightforward and dependable.

This circulation pump and motor assembly is a genuine replacement component designed to deliver high-pressure water flow through the spray arms during the wash cycle. Positioned at the heart of the dishwasher’s cleaning system, it ensures thorough rinsing and effective soil removal. Unlike the drain pump, this assembly is responsible for circulating water, not expelling it. Common symptoms of a failing pump include poor cleaning performance, unusual noises, incomplete cycles, water leakage, or failure to fill. Compatible with select Whirlpool dishwashers, this OEM part meets strict quality standards for durability and performance. Installation should be performed with the appliance unplugged, and model compatibility must be verified prior to purchase.

This pump and motor assembly circulates water in dishwashers during the wash cycle. Check the motor’s resistance if water isn't circulating, and replace if needed. Verify compatibility with your model.

This OEM Dishwasher Upper Rack Adjuster is a grayish-black, plastic part which will require a screwdriver to install. It fits onto the dishwasher rack and connects it to the track allowing it to slide in and out. If broken then the rack will no longer slide properly, and the part must be replaced. The installation has been rated as "easy" by customers. Before beginning any repair, you should unplug the dishwasher and wear gloves to protect your hands. Check your model number and user manual to see if this part is right for you! Your dishwasher should have a left and right upper rack adjuster, and both are the same part. These parts are sold individually, so if you are looking to replace both, you will need to order two parts.

The heating element is not designed to heat the water that enters it, but is designed to maintain the heat of the water that enters the dishwasher. It is located on the bottom of the dishwasher.

The mounting bracket is sold individually, without screws. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward. The bracket is made entirely of metal. It is recommended to check all brackets, if applicable, because they often wear at the same rate and both may need to be replaced. This is an OEM part that is sourced from the authentic manufacturer. Tools needed are a pair of needle nose pliers and a screwdriver.

This dishwasher filter is a genuine OEM component designed to work with the water pump, preventing debris from entering and potentially damaging the pump system. Made with a gray plastic top and bottom, each approximately 5 inches in diameter, the filter plays a critical role in maintaining proper drainage and cleaning performance. Over time, the filter may become clogged or damaged, leading to poor cleaning results or drainage issues. Replacement is straightforward: turn the old filter counterclockwise to unlock and remove it, then screw in the new filter, ensuring it is securely seated. Regular inspection and replacement help maintain optimal dishwasher function.

The plastic button covers the sharp ends of screws along the edge of the dishwasher tub. Sold individually.

This is a screen filter, designed to keep food particles, gunk, and debris from entering the pump of your dishwasher. If this filter is missing, damaged, or simply unusable, it will need to be replaced so you can effectively clean your dishes. Replacing this filter is simple, as you only need to twist and remove the lower filter, before you can carefully lift this filter out. This filter is an OEM part and is sold individually.

This is an upper spray arm for a dishwasher. While the appliance is in use, the spray arm rotates while water travels through it to distribute water evenly throughout the dishwasher tub. This ensures the dishes are efficiently and properly cleaned. It measures approximately 19 inches long and is grey in color.