KBNU487VSS00 KitchenAid Grill - Overview
Sections of the KBNU487VSS00
[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
Surface Light Bulb
PartSelect #: PS886465
Manufacturer #: 8204670
This surface light bulb is used in ranges and microwaves. It has a high voltage of 12 and 10 watts. This bulb illuminates and directs light at the bottom of the microwave or the inside of it. It also ...
$23.60
In Stock
Metal Screen
PartSelect #: PS2377963
Manufacturer #: W10294369
Used with outdoor grills.
No Longer Available
Rod Kit
PartSelect #: PS2378199
Manufacturer #: W10303326
As per the factory - this kit contains 6 rods with screw nuts and washers.
No Longer Available
Heating Element
PartSelect #: PS11748833
Manufacturer #: WPW10134795
Used with gas grills.
$239.61
Special Order
Surface Burner Orifice Holder
PartSelect #: PS11750959
Manufacturer #: WPW10244714
$63.64
Special Order
Transformer
PartSelect #: PS2352752
Manufacturer #: W10247117
This genuine Whirlpool OEM part, termed as TRANSFORMR, is a transformer specifically designed for use in gas grills. Uniquely crafted to connect your gas grill to an electrical outlet, this part needs...
$186.47
Special Order
Manuals & Care Guides for KBNU487VSS00
Click to downloadInstall
Installation Instructions
(1.67MB)
Manual
Owner's Manuals
(1.67MB)
Manual
Owner's Manuals
(9.18MB)
Questions And Answers for KBNU487VSS00
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the KBNU487VSS00
[Viewing 1 of 1]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Igniter went out with that light
-
David from FRESNO, CA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
light bulbs nedd to repace it.
-
Jorge from Bay Point, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
45 of 196 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Screen for searing burner had burnt out and needed replacing
Screen is held in place with 6 screws into spacers keeping it away from the burner. Screws were totally frozen and could not be loosened, even with WD 40. They had to be cut off and now the screen is not secured. I will need new spacers but they will be very difficult to remove. This s a very poor design.
Parts Used:
-
John from Hayesville, NC
-
Difficulty Level:Very Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Screw drivers, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!