Parts That Fix KitchenAid Refrigerator KBFN502ESS02 Light not working
Light not working is a commonly reported symptom for the KBFN502ESS02 KitchenAid Refrigerator, and we have put together a full guide
... Read more
on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your KBFN502ESS02 KitchenAid Refrigerator that will fix Light not working.
We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
Read less
Light not working is a commonly reported symptom for the KBFN502ESS02 KitchenAid Refrigerator, and we have put together a full guide on how to fix this.
This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your KBFN502ESS02 KitchenAid Refrigerator that will fix Light not working.
We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
Fixes Symptom 84% of time
Door switch turns the light off when you close the door.
$
29.82
In Stock
PartSelect Number PS12728638
Manufacturer Part Number W11384469
Replacing your Amana Refrigerator Refrigerator Door Switch
Customer Repair Stories
Light Switch broke
An easy job for smaller hands. Removed the two bolts holding the light cover. Removed two electrical connections from the old switch by pinching the retaining clip,removed the switch, snapped in the new one and re-attached the connectors. Your online illustrations helped me to know that the plastic housing for the light switch would only
... Read more
swing down so far and was not intended to be removed. Saved me from breaking that plastic cover's tabs. This home repair saved me more than 5 times the cost of hiring a professional to do it. Very happy homeowner.
Read less
-
James Richard from St. Cloud, MN
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
47 of 75 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lights inside refrigerator not working
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again.
-
Clint from Rayville, MO
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
134 of 245 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fixes Symptom 15% of time
The LED light attaches inside the cabinet and illuminates the inside of the refrigerator or freezer
$
184.97
In Stock
PartSelect Number PS17216452
Manufacturer Part Number W11683242
Customer Repair Stories
Light out inside fridg.
Put painters tape next to light, so I wouldn't scratch surface. Worked edge of light down and out of hole with small screwdriver. Chechen wireing , light might work ? Unplugged light assembly . Plugged in new light , and reinserted light into opening . Removed tape ,, done. You can use putty knife in place of screwdriver. Be patient. Go
... Read more
ogle helps also.
Read less
-
William from N MYRTLE BCH, SC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
11 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
LED behind upper compartment of freezer failed
The hard part was getting the OLD fixture out. They tell you to protect the surface around it with tape, but try sticking tape to a freezing cold surface with water condensing on it! And it's so firmly snapped in place that it takes a putty knife and screw driver to push the prongs back to get it loose. Finally, the fixture is on the ceil
... Read more
ing behind the icemaker so very awkward working conditions, plus and you can't see well because ALL of the lights are out (remember, they're in series). To see I had to prop my phone up at just the right angle to shine its little light on the area.
But getting it in was literally a snap. Just snap the couplings together, carefully push the wires into the empty space and slide the rear prongs in, then snap the front ones in simply by pushing the whole fixture firmly. Then pat yourself on the back!
But getting it in was literally a snap. Just snap the couplings together, carefully push the wires into the empty space and slide the rear prongs in, then snap the front ones in simply by pushing the whole fixture firmly. Then pat yourself on the back!
Read less
-
Matthew from ALTOONA, PA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
13 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
3 SWITCH
Fixes Symptom 1% of time
Introducing Whirlpool's 3 Terminal Door/Light Switch, designed to ensure optimal performance and enhance your refrigerator's efficiency. This genuine OEM part works seamlessly with select Whirlpool models, turning the light off when you close the door. Remember to store food safely and unplug your refrigerator prior to installing this part, wearing work gloves to protect your hands. Always verify the correctness of the part number before ordering, as parts may slightly vary in size and shape although they may look the same. Let Whirlpool enhance your kitchen experience with this vital appliance component.
$
27.76
In Stock
PartSelect Number PS12584639
Manufacturer Part Number W11289496